How to Remove Excess Grout from Brick Slip Bathroom Flooring in Saxilby Lincoln

I was asked if I could improve the look of this new bathroom floor that had been laid with brick slips in a herringbone pattern at a property in Saxilby near Lincoln. The builder had done a solid job of laying the bricks but had been overzealous on the grouting and was unable to remove all of it resulting in a whitening of the red bricks due to grout haze. Unhappy with the appearance of their new bathroom floor and with little chance of resolution with the builder they contacted Tile Doctor to see what could be done to improve their appearance.

 

Brick Slip tiles are basically a very thin brick which allows it to be laid like a tile, normally they are cut from an actual clay brick although there are other types. Thin like a tile and light weight they can be used to quickly create authentic looking brick walls and floors.

I visited the property to understand the problems and whilst I was there, I carried out a test clean to show the client what could be achieved. They were happy with what I showed them and booked me in to have the work done.

 

Removing Grout Haze from Brick Slip Flooring

To remove the grout haze, I started off with an application of Grout Clean-up which contains phosphoric acid and is designed exactly for this purpose. It was a small space to work in so the product was scrubbed into the tile by hand until I got them as clean as possible. This was followed by a quick rinse and extraction with a wet vacuum.

I then inspected the floor and could see more work was required so this time I laid down Acid Gel which is a blend of Phosphoric and Hydrochloric acids and left it to dwell for ten minutes. After another scrub I was pleased to see I had managed to remove all the grout haze and the red brick was really starting to come through. I then gave the floor a thorough rinse with water and then removed the soiling and as much moisture as possible with the wet vacuum. I left the floor to dry off whilst I went to lunch leaving an air mover in place to assist with the drying.

 

Sealing Brick Slip Flooring

Once it had dried the floor was then sealed using Tile Doctor Colour Grow which is a colour enhancing product that as the name suggests improves colour in the tile, it’s also an impregnator which works by occupying the pores in the brick protecting it from within.

 

The client was over the moon and said that is how they wanted it to look originally. For cleaning I made the client aware of the problem of using harsh cleaning products on sealed tiles and advised them to use Neutral Tile Cleaner which is a mild but effective cleaner that won’t erode the sealer with regular use.

 

Source: Grout Haze Removal Service in Saxilby Lincolnshire

Putting the Shine Back on Encaustic Floor Tiles in Hemswell Cliff Lincolnshire

The photographs below are of an Encaustic Tiled Floor which had been installed some years prior in the kitchen of at a property in the village of Hemswell Cliff which is between Gainsborough and Market Rasen.

I paid a visit to the property initially to survey the floor and discuss the problem with the client. The main issue was the tiles had become dull and she couldn't keep them clean. I explained that Encaustic tiles are porous and need to be kept sealed to prevent the dirt from becoming ingrained in its pores; over the years since installation the sealer had simply worn down and now dirt was getting into the pores of the tile and once that happens it can be difficult to get it out. 

To prove my point, I carried out a demonstration on how I would clean them and explained the different sealer options available and how each sealer can have a different effect. She was pleased with the demonstration and was happy to accept my quote to deep clean the whole floor and then re-seal it.

Deep Cleaning Encaustic Kitchen Floor Tiles

I set about scrubbing the floor using a hot water dilution of Tile Doctor Pro-Clean Tile and Grout cleaner combined 50:50 with NanoTech HBU Remover which adds tiny abrasive particles to the solution to make a more effective cleaning product. The solution was worked into the tiles by scrubbing with a rotary machine fitted with a Black scrubbing pad.

The pads struggle to reach into the recesses between the tiles so to get the grout clean I scrubbed them by hand using a stiff brush. Once done the soiled solution was removed using a wet vacuum and floor inspected to ensure it was as clean as possible. Any stubborn areas were spot treated by hand and then the whole area thoroughly rinsed down with clean water to remove any trace of cleaning product.

Finally, the wet vacuum was used to dry the floor as much as possible with assistance from a Turbo Air blower to help reduce the drying time.

 

Sealing Encaustic Floor Tiles

It wasn’t a particularly large floor and a warm day so I was able to complete the cleaning process by lunch time and after a few hours later with the assistance of the air blower the floor was dry and ready to be sealed.

Having discussed sealer choice with the client earlier a decision had been made to seal the encaustic tiles with Tile Doctor Seal and Go which adds a nice subtle sheen to the tile. Five coats of Tile Doctor Seal and Go were needed before the tiles were fully sealed, it’s a water based protective sealer so it doesn’t give off any odour whilst it dries and it provided the finish the customer was looking for.

Once completed the colours in the tiles were really vivid and resulted in one happy customer with a clean easy to maintain floor. On the subject of cleaning, I recommended the use of Tile Doctor Neutral Tile Cleaner which is a mild but effective tile cleaner. The problem with many of the tile cleaning products you find in supermarkets is they contain bleach which is simply too strong for use on a sealed tile as it will strip off the sealer.

Source: Encaustic Floor Cleaning and Sealing Services in Hemswell Cliff Lincolnshire

How to Remove and Ineffectual Sealer

We were asked to restore a large 70m2 riven Sandstone floor in the historic market town of Boston where the customer had been sealing with an impregnator sealer but the stone just kept absorbing the daily dirt despite repeated cleaning. The Sandstone was now very dull with ingrained dirt and mopping just seemed to make it worse. Unhappy with the appearance they decided to call us in to resolve the issues and add a resilient finish with a slight sheen.

 

Something clearly was not right so after discussing the issue on the phone I arranged to visit the property and survey their problematic stone floor. I concluded that the sealer the client was using was not effective at sealing the floor properly and had let dirt get into the stone. This could be because the floor had not been cleaned well enough prior to sealing, insufficient sealer had been applied or perhaps the sealer wasn’t suited to Sandstone. Either way to resolve the problem the solution would be to deep clean the Sandstone stripping off the old sealer in the process and then use something more suitable for Sandstone such as Tile Doctor Seal & Go which would also give the subtle shine appearance they were after.

I worked out a quote to renovate the floor, which was accepted and a date agreed to do the work which would take two days, one to deep clean the stone and the second to seal.

Deep Cleaning a Riven Sandstone Tiled Kitchen Floor

The first day started preparing the area which in this case was simply a case of removing the kickboards from under the kitchen units. Next, I created a strong cleaning, sealer stripper solution by combining Tile Doctor Pro-Clean with Remove and Go and then working in sections sprayed it on to the Sandstone and left it to soak in for ten minutes.

 

The solution was then scrubbed into the stone using a brush pad fitted to a rotary buffer machine with added weight to improve contact. Using a brush pad is an important factor when cleaning riven stone as a normal flat pad would struggle getting into the grooves of the stone and works well on the grout lines as well.

The scrubbing action generated a lot of slurry which was extracted using a high pressure Rotovac system which is a great time saver. The Rotovac works by applying hot water under high pressure onto the floor to further force out ingrained dirt and muck from the stone whilst simultaneously extracting the soil back to a tank on our van.

 

The results were amazing leaving the stone both clean and free of the old ineffectual sealer. After this the floor was inspected and stubborn stains were spot treated and the floor given a final rinse. Now satisfied the Sandstone was clean I left a couple of air movers in place to assist with drying overnight.

 

Sealing a Riven Sandstone Tiled Kitchen Floor

The following day the moisture levels in the floor were checked with a damp meter, its important the stone is dry before sealing otherwise the results can be patchy. Fortunately, the air movers had done an excellent job and I was able to start applying the sealer.

   

Seal and Go is a water-based sealer (so no smell as it dries) that works by protecting the stone with an impermeable layer. It takes multiple coats to fully protect the stone but does give the Sandstone a lovely appearance and will protect the floor from everyday wear and tear as well as making it easy to clean. 

The customer was over the moon and said it was better than when they first had it installed and mentioned they would definitely recommend our services going forward.

Source: Riven Sandstone Tile Cleaning and Polishing Service in Lincolnshire

Restoring the Appearance of a Dirty Flagstone Floor

We were asked by a client who had rented her property out near Spilsby Lincolnshire, if we could restore her very dirty natural flagstone hallway. The previous tenants had subjected the floor to heavy usage and unfortunately it had not been maintained very well. Spilsby is a small market town that has retained its’ character and not changed much since the 19th century. Being about 17 miles East of my base in Woodhall Spa it wasn’t long before I was able to go over and survey the floor.



As you can see from the pictures the flagstones were very well used and had lost all their natural beauty. The stone would normally have a lovely mixture of colours and grains showing, as you can see these were nowhere to be seen. I suspect the tenants had been using household cleaners on the floor which tend to strip the protective sealant due to their acidic composition leaving the stone vulnerable. The stone tiles were riven so once the sealant had started to break down the dirt soon becomes ingrained in the uneven surface making them difficult to clean.

The client was keen to get the floor looking nice and clean ready for the next tenants to move in so after discussing the process to get the floor looking good again, we agreed a price and booked in a date for the work to be completed.

Cleaning and Restoring a Natural Stone Tiled Hallway Floor

Arriving on the first day, we taped up the skirting and plinth to prevent them getting damaged. A strong dilution of Tile Doctor Pro-Clean was then applied to the stone floor and left to soak in for ten minutes so it could get to work breaking down the dirt and any remaining sealer. Pro-Clean is a professional tile and grout cleaning product that is ideal for cleaning dirty stone tiles like these.

The stone tiles were riven (not a smooth) so we used a Rotovac system to get the tiles clean. The machine scrubs the floor with soft brushes whilst simultaneously extracting the soil using self-contained pressurised water. It’s a very efficient way to deep clean the floor and vacuum all the dirty solution away from the floor. It immediately transformed the look of the stone and achieved a 1st class result in removing all the grime and dirt from the stone.

The cleaning process went very well and by the time we had finished the whole area looked much brighter. The natural tones of the stone had come back to life and with the application of a sealer they should stay that way for some time to come. Before this could happen however the floor needed to be dry so we the help of a couple of turbo dryers the floor was left to dry off overnight.

Sealing a Natural Stone Tiled Hallway Floor

The following day after making sure the floor was dry by testing with the moisture meter, we sealed the floor with two coats of our natural look sealer Tile Doctor Ultra-Seal. This is an impregnating sealer that works by seeping into the pores of the stone thereby preventing dirt and liquid from becoming ingrained there.


The sealer gave the stone a natural look that the client requested, and she was delighted with the end result. Hopefully she will have no trouble renting out the property, the floor now looks stunning!


Source: Flagstone Tile Cleaning and Sealing Service in Spilsby, Lincolnshire

Renovating Dirty Travertine Floor Tiles in Lincolnshire

A customer from the village of Coningsby was having trouble keeping their Travertine tiled Kitchen floor clean. Another company had sealed the flooring previously, but it clearly hadn’t lasted and dirt had now become ingrained in the pores of the stone. As a result, mopping the floor wasn't effective at removing the dirt from either the Travertine or the grout lines.

This was a busy work kitchen that needed to have a floor that is easy to maintain; now frustrated with the way the floor looked they considered having it taken up and replaced but decided to contact Tile Doctor first looking for a remedy.


We visited the property to survey the floor and discuss the issues they were facing with the floor. It clearly needed to be deep cleaned and then resealed properly with a more effective product. I explained our process and discussed the result they were looking for. They were happy for me to go ahead and requested a Matt finish rather than a shine or gloss look as it was a high use kitchen.

Cleaning and Burnishing a Travertine Tiled Floor

I returned on the agreed date and spent the first day removing the old sealer that was no longer working and deep cleaning the flooring. To achieve this, I used a series for burnishing pads of different grits. After each pad the floor was rinsed using our Rotovac system which rinses the floor and extracts the dirty water off the floor at high speed. Although an expensive investment the machine makes light work of cleaning hard floors and saves a lot of time.


After cleaning the floor, a turbo dryer was installed to speed up the drying process so the floor can be inspected, and any stubborn areas redone. The tiles looked nice and clean, but I could see some areas of grouting needed more work so these were hand scrubbed with Tile Doctor Pro-Clean followed by another rinse to remove the soil.


At this stage I also noticed a few holes in the travertine that were filled for the customer with a matching colour. This is a common problem for Travertine and unfortunately, they easily attract dirt, so filling makes the floor much easier to clean going forward.

Sealing a Travertine Tiled Floor

We returned the following morning and tested the flooring with a damp meter to make sure it was fully dry. All was well and it was ready to seal with our quality impregnator Tile Doctor Colour Grow which protects the floor from within whilst enhancing the natural colours in the stone in the process. The Travertine proved more absorbent than usual for this type of stone and took three coats before a water test indicated the floor was fully sealed.


You can see from the photo above that the water beaded up on the surface and can be simply wiped away even after a few minutes. This shows maximum protection has been applied. Given my experience with this floor I suspect the previous company had not applied enough sealer and this would explain why it failed, had they conducted a water test then this should have been obvious.

We then gave a final polish with our buffer and a white soft pad to really strengthen the seal and give the best finish. I should mention that Colour Grow leaves a matt finish which matches the customer’s request.


For aftercare cleaning going forward I left the customer a complimentary bottle of Tile Doctor Neutral Tile Cleaner that looks after the seal better than any high alkaline or acidic cleaners like bleach or washing up liquid which will prematurely erode the seal.

The customer was delighted with the results, commenting on how much brighter the whole room looked.




Source: Travertine Tile Cleaning and Sealing Service in Coningsby, Lincolnshire

Dirty and Cracked Limestone Floor Tiles Cleaned and Polished

This customer from Louth had a very dirtyLimestone tiled floor with some cracks evident installed throughout the kitchen, hallway and conservatory. It was dull and not looking it's best so she had asked several companies in the local area to quote but they did not feel able to help. Fortunately Read more...

Maintaining Terracotta Kitchen tiles

This Terracotta tiled floor was laid in the kitchen of a property located in Horncastle, Lincolnshire. The tiles were well maintained and in reasonable condition compared to some floors I have worked on but they had started to look tired and dull in some areas and so the customer wanted them Read more...

Burnishing and Sealing Limestone Tiles in Gainsborough

This was a large 60m2 Limestone tiled floor installed in the entrance hall and kitchen of a residence in the town of Gainsborough. The Limestone tiles had lost their shine and cracks had appeared in a number of tiles which was due to the floor settling after it had been built, any previous Read more...

Stone Tile Maintenance

Details below of a Natural Riven Stone tiled floor installed in the Kitchen of a house in Boston, Lincolnshire. The client had previously sealed this floor with a commonly available sealer and found the results unsatisfactory; the floor had a riven surface and that combined with two large dogs made cleaning was a constant burden. Natural-Stone Tile Cleaning The first step was to remove the existing sealer and give the floor a thorough clean; fortunately we were able to do this using a Read more...

To read more on this topic click here

Dealing with Scratched Marble Floor Tiles

This Marble Tiled floor was installed in the conservatory of a house in Woodhall Spa who had asked if we could remove the scratches from their inherited marble tiles around the door area and where furniture had been dragged across the tile as shown in the photos. Interestingly our customer is a chief engineer on cruise ships all over the world and knew what this floor could look like if restored professionally. Burnishing Mable Tiles Other than the scratches the majority of the floor had been well maintained so the solution was to burnishing the marble back to its original condition using a set of diamond encrusted pads fitted to a slow speed machine and lubricated with a little water. The burnishing pads come in a set of four and applied to the floor with a little water one by one using a rotary machine running at slow speed. The process starts with the coarse pad which strips back the top layer and removes sealers and dirt from the surface of the stone. The pads then become finer and finer with the last pad being a final polish that takes the tile back to near it's originally intended shine. You can see from the photographs that we actually managed to resurface the marble, remove the scratches and we also filled in some small holes and then allowed the floor to dry Read more...

Removing Stains for Sandstone Flagstones

Recently, I was asked to visit a property in the small port town of Boston, Lincolnshire, to quote for a clean and seal. My client had recently moved into a new home, but the riven natural Sandstone flagstone floor had not been properly cared for or sealed by the previous owners and was now in need of a thorough clean. Sandstone flagstones are a popular choice for both residential and commercial use, and are especially popular in kitchens and hallways. This particular floor was blemished by Read more...

Maintaining And Polishing Travertine Tiles in Lincolnshire

This fantastic Travertine tiled kitchen floor was in a bad way. Not only had it not been treated to a proper clean and seal in a long while, but it has also suffered from natural pitting, leaving lots of little holes that damaged the overall appearance of the floor. Travertine is very aesthetic, Read more...

Restoring the Appearance of Polished Slate Tiles in Boston

While fantastic to look at, Riven Slate tiles can be particularly difficult to keep clean. The natural unevenness of the stone causes dirt to become more easily trapped and more difficult to remove. Over time, heavy buildup of ingrained dirt can have the effect of dulling the colours in the Read more...

Pitted Travertine Kitchen Tiles Refurbished in Lincolnshire

Quite often our customers will be new property owners who have inherited fantastic tiled floors that are in need of smartening up. Typically the previous owners struggled to maintain the floor which is not unusual when it comes to high quality natural stone such as Travertine and this was the Read more...

Sealing Tips for Sandstone Kitchen Floor Tiles

I can't stress how important a sealer is when it comes to maintaining the look of a stone floor and although they can protect a floor for many years if not maintained they will all but disappear in high traffic areas allowing dirt and stains to penetrate the pores of the stone. This gradual degradation occurs over such a long period it usually happens without being noticed. This Sandstone tiled kitchen floor and entrance hall at a barn conversion property in Sleaford had not been sealed in Read more...

Restoring a Victorian Tiled Bathroom in Horncastle

The owner of this Victorian tiled bathroom floor in Horncastle had tried scrubbing and scraping these tiles will little to show for it, in the end after spending hours on this cold floor and trying lots of different products he was fed up and it still looked less than satisfactory. The tiles were very old and dirty and had remnants of glue stuck around the edges indicating they had previously been covered by something else such as lino, fortunately Victorian tiles are our bread and butter Read more...

Riven Slate Tiles Rejuvenated by Deep Clean and Seal in Boston

While fantastic to look at, Riven Slate tiles can be particularly difficult to keep clean. The natural unevenness of the stone causes dirt to become more easily trapped and more difficult to remove. Over time, heavy buildup of ingrained dirt can have the effect of dulling the colours in the stone. This was the case with this large area of Riven Slate tiles at a very busy farmhouse in the Lincolnshire port town of Boston, the original namesake for the perhaps more famous city in Read more...

Dull and Dirty Sandstone Tiles Revitalised in Sleaford

I can't stress how important a sealer is when it comes to maintaining the look of a stone floor and although they can protect a floor for many years if not maintained they will all but disappear in high traffic areas allowing dirt and stains to penetrate the pores of the stone. This gradual degradation occurs over such a long period it usually happens without being noticed. This Sandstone tiled kitchen floor and entrance hall at a barn conversion property in Sleaford had not been sealed in Read more...

Mucky Travertine Tiled Floor Restored Near Woodhall Spa

Quite often our customers will be new property owners who have inherited fantastic tiled floors that are in need of smartening up. Typically the previous owners struggled to maintain the floor which is not unusual when it comes to high quality natural stone such as Travertine and this was the case with this Travertine tiled floor that I recently restored at a property near Woodhall Spa, on the southern edge of the Lincolnshire Wolds. The customer not only needed a deep clean for the tiles Read more...

Travertine Kitchen Tiles Transformed in Sleaford

This fantastic Travertine tiled kitchen floor was in a bad way. Not only had it not been treated to a proper clean and seal in a long while, but it has also suffered from natural pitting, leaving lots of little holes that damaged the overall appearance of the floor. Travertine is very aesthetic, but suffers from the drawback of being quite soft compared to other types of stone (typically it sits between 3-4 on the Moh's scale of mineral hardness). The customer, who lives in the town of Read more...

To read more on this topic click here