Wednesday, March 23, 2016

Restoring the Appearance of Slate Bathroom Tiles

Our client in Ravensden had a rough slate tiled floor fitted into her en-suite bathroom approximately six years ago. The tiles were never sealed and due to the hard water in the area, plus shower products the floor developed a white crust in areas.

Limescale Treated on Slate Bathroom Tiles Ravenden Before Limescale Treated on Slate Bathroom Tiles Ravenden Before

Tile doctor deals with tile problems across the UK everyday and leads the way in developing new techniques to deal with tile related issues and so I was confident of finding a solution that could resolve the problem with a single visit.

Dealing with Limescale on a Slate tiled floor

Mindful of damp levels in the slate we used a small coarse 200 grit Tile Doctor Diamond pad on a six-inch hand held machine to take off the lime scale. This cleaned most of it off but in corners and some deep rough areas where the pad could not access were spot treated using Tile Doctor Acid Gel which was left to sit and dwell for 20 minutes then rinsed off the floor.

Sealing a Slate tiled floor

A turbo fan was used to speed up the drying of the floor and within a couple of hours it was dry enough to seal for which we used a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that seeps into the pores if the Slate protecting it from within and enhancing the look of the stone in the process.

Limescale Treated on Slate Bathroom Tiles Ravenden After Limescale Treated on Slate Bathroom Tiles Ravenden After


Source: Slate Tile Problem Resolution Service in Bedfordshire