Cleaning a Victorian Floor
I'll try and keep the details short so as not to lose your attention but basically the tiles were first stripped from all sealers and coatings that had been previously applied to the floor using a strong dilution of Tile Doctor Remove and Go which was left to soak for an hour before working it in with a rotary machine equipped with a black scrubbing pad and then rinsing the floor with water which was extracted using a wet vacuum. Secondly we then cleaned the floor four times using a rotary machine and a strong mixture of Pro-Clean which was again wet extracted and rinsed again. Finally we cleaned and rinsed the floor using Tile Doctor Neutral Cleaner to neutralise the tiles from any products which may affect the sealer before leaving the floor overnight to dry assisted with a turbo air mover.
Sealing a Victorian Floor Sealing
Once the floor was dry it was then sealed using two coats of Tile Doctor Colour Grow which brings out the colour in the tile and provides the matt effect the owners were looking for as well as protecting the floor from staining.
