Victorian Tiles Cleansing
In order to tear down the glue and paint the affected areas were sprayed with Tile Doctor Remove and Go which was then left to seep in. After 10 minutes of soaking time, I then proceeded to scrub off the glue and paint and the resulting dirty solution was rinsed away.
The next step was to scrub the whole tiled floor using a rotary machine fitted with a scrubbing pad and a strong dilution of Tile Doctor Pro-Clean high alkaline cleaner. This broke down the soil ingrained in the tile and released it along with the remaining old sealer; the floor was then pressure rinsed to ensure all of the dirt was removed from the pores and stubborn areas re-treated.
Sealing Victorian Tiles
We then left the floor alone to dry for twenty four hours before coming back to seal it for which I used four coats of Tile Doctor Seal and Go. This is a water based topical sealer that leaves no smell and provides a nice sheen to the floor; it will also repel liquids and dirt making it easier to maintain the tiles in the future.
You can see from the photographs how the sealer has given a high sheen finish to the tile which reflects the light and enhances the colors of the stone leaving the floor looking as good as new and very vibrant.