Adding Value to your Victorian Property with Floor Tile Renovation

We were contacted by a customer in West Kirby who needed help renovating a Victorian tiled hallway in a house they had just purchased. Kirby is a desirable seaside location North of Heswall that expanded with the arrival of the railway in 1848. The railway brought a demand for property and so it’s not unusual to find housing stock in this area dating back to the Victorian era.

 

The Victorian tiles at this property appear to have been neglected by the previous owner and were now looking very dull and marked by paint from decorating; all the colours looked washed out and the floor was now looking very unappealing.

 

The good news however is that this problem is not uncommon and with a deep clean and a fresh sealer applied it can be transformed. I gave the owner a quote which was accepted a date agreed for my return to do the work.

 

Deep Cleaning a Victorian Tiled Hallway Floor

On the first day the floor was sprayed with a neat solution of Tile Doctor Remove and Go which is a powerful alkaline cleaning and stripping agent used to remove old seals and paint. The solution was left to dwell for about twenty minutes so it could soak in and get to work. It was then scrubbed into the tiles using a coarse 200-grit pad fitted to a heavy buffing machine. Water was then added to the floor for lubrication and the soils released from the pores of the tile during scrubbing was removed by with a wet vacuum.

To treat the stubborn paint stains and remains of what I suspect was carpet adhesive a hand scraper and wire brush was used, this was made easier by the Remove and Go which had softened the paint etc.

The next stage was to give the Victorian tiles a mild acid wash using Acid Gel which is applied to the floor, scrubbed in, and rinsed off with a little water then extracted using the wet vacuum. We always recommend an acid wash for old floors like these as it will counter any efflorescent salts resident in the tiles and helps to remove other mineral contaminates and old grout that can mask the true beauty of the tiles.

Sealing a Victorian Tiled Hallway Floor

I left the tiles to dry out for two days before returning to apply the sealer, first checking it was dry by testing for moisture in various places with an electronic damp tester. It’s not a good idea to apply a sealer to a damp floor so we always check first.

Satisfied the floor was dry, I started applying a coat of Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that helps to bring out the true colours in the tile. This was allowed to dry for thirty minutes and then followed up five coats of Tile Doctor Seal and Go Extra which is a breathable sealer that leaves a lovely satin finish and builds on the protection.

 

Once done the Victorian hallway tiles looked so much cleaner and healthier. It was quite a transformation and the new sealer had given the floor a nice low sheen shine which the customer was very happy with.

 

For aftercare cleaning I left them with a bottle of Tile Doctor Neutral Cleaner which is specially formulated for cleaning sealed tiles. We don’t recommend tile cleaning products you find on supermarket shelves as the are usually too strong and can strip a sealer off the floor prematurely. If your choosing another product to clean your floor always read the label to make sure its compatible.

Source: Victorian Floor Cleaning and Renovation Service in Merseyside

How to use a Pin Gun to remove Self-Levelling Compound from a Quarry Tiled Floor

We were contacted by a client from Formby asking for advice on how to remove a thick layer of floor leveller from her Quarry tiled floor. I suspect at some point in the past a previous owner had decided to cover the tiles with lino and a cement-based levelling compound was applied to level the floor first. My client had tried to remove it herself but found it very hard going and after realising she had quite a project on her hands decided to call us instead and see if we could help with the restoration.

 

I worked out a quote for the client which would include removing the self-levelling compound, cleaning up the tiles and then sealing them to improve its appearance and protect it going forward. The quote was accepted, and a date agreed for the restoration to be completed which would take two days.

Cleaning and restoring a Stone Tile Kitchen Floor

We have a variety of tools that we can use for removing cement but in this case, I decided to use an air operated pin gun. The head of the gun has long pins of different length which are fired at the floor gently chipping away at the floor compound, this made short work of breaking up the cement so it could be swept away. A lot easier than the method the client had previously tried.

With the floor clear of cement, it was given an acid wash with Tile Doctor Acid Gel scrubbed in with a buffing machine fitted with a black pad. The acidic formula cleans up the stone of old cement including fine particles of dust. Afterwards the gel was rinsed off the floor with water and extracted with a wet vacuum.

Sealing a Stone Tiled Kitchen Floor

We let the floor dry out overnight and returned the next morning to apply the sealer. For the best results, the stone needs to be dry so before sealing I always take several moisture readings with a damp meter to make sure. The results were good so the first of what would be three coats of sealer were applied to the floor. I used Tile Doctor Colour Grow for sealing, it is an impregnating sealer that works by occupying the pores in the store thereby protecting it from within, it also brings out the colour in the stone.

Once done the floor looked great, the old self-levelling compound was gone and the rich colours in the tile had been restored. In fact is was only when finished did we realise these were in fact Baked Clay Quarry Tiles, minerals are added during manufacturing to give then colour, although 95% clay they are very tough like stone. The client was over the moon with the outcome, the floor had been restored to its’ former glory.

 

For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner to keep the floor in good condition. It is pH neutral so will ensure the newly applied sealer is not compromised and the floor will continue to look good for a long while to come.

Source: Quarry Floor Tile Cleaning and Restoration Service in Merseyside

How to Renovate a Terracotta Tiled Floor

I was called in by a client from the Cotswolds market town of Witney who had lifted up a carpet to discover a Terracotta tiled floor underneath. Although the floor was in good physical condition the carpet and underlay had been trapping moisture from evaporating resulting. Old floors like this one were laid before damp proof membranes became standard so covering them up can cause damp issues. It is important to allow moisture from underneath tiled floors to evaporate unimpeded otherwise moisture can reach out to the walls resulting in rising damp.

 

Moisture can also penetrate the pores of the clay Terracotta tile potentially leading to its degradation over time and in this case resulted in the appearance of white efflorescent salts being deposited on the tile surface causing unsightly staining.

 

Cleaning Terracotta Tile

I started cleaning the Terracotta by doing applying strong dilution of Tile Doctor Pro-Clean which is an effective alkaline tile cleaner. For best results I spread the solution on the floor and then leave it to dwell and soak in for up to twenty minutes. This gives the product time to eat into the dirt and old coatings before being scrubbed in with a black pad fitted to a rotary floor machine. This worked very well on the floor and the cleaning solution was soon dirty with the released soil which was removed using a wet vacuum and more water to rinse it away and dry the floor as much as possible.

To remove the white efflorescent staining the floor was given an acid wash using Tile Doctor Grout Clean-up which is designed for removing grout and other mineral stains from tiling. This was brushed into the tile and grout by hand and left to fizz as it reacted with the efflorescence. After another rinse and extract with the wet vacuum the floor was left to dry out for a couple of days. The next step would be to seal the Terracotta and for best results the tile needs to be dry.

 

Sealing Terracotta Tile

On my return I checked the tiles were dry by taking a few moisture readings with a damp meter. The readings came back fine so I need not have been concerned however Terracotta tiles being made from clay are very porous so its always a good idea to check.

Given the previous issues with damp I knew I would need to use a fully breathable sealer, so I opted to use Tile Doctor Colour Grow. This product will cope well with the moisture and contains a colour enhancing formula that really brings out the red colour of the Terracotta.

 

Except for a few deep efflorescent stains in the grout, the floor responded very well to the treatment and made a massive improvement to the overall appearance. My client was pleased with the transformation and the newly restored floor matched well with the character of the property.

Source: Terracotta Cleaning and Renovation Service in Oxfordshire

How to Renovate a Victorian Tiled Hallway

Here’s the 2nd part of the floor restoration work I did for a property developer last year in Harborne, this time detailing the renovation of the Victorian tiled hallway floor. I must credit the builder for engaging me on this project as many builders would attempt this work themselves, rather call in a professional, which often leads to a less than desirable result.


The house dated from the 1800's and contained two old floors that needed restoration. I didn’t want to trample over a recently renovated hallway floor whilst rebuilding the old Quarry tiled floor in the front room so naturally I addressed that first. If you missed the first post detailing its restoration you can find it here: Victorian Quarry Tiled Floor Restoration in Harborne


Once the front room restoration was complete, I moved onto the original Victorian Hallway which was dull, dirty and needed some tiling work around one of the door thresholds.

Cleaning and Repairing a Victorian Tiled Hallway Floor

The Victorian Hallway needed to have a threshold restoring, luckily the builders had kept the original tiles. Firstly, the space below the tiles needed to be filled with quick drying cement. The tiles were then re set and grouted.


Next issue was to tackle the paint spots and carpet adhesive. I did this by spraying the surface of the tile with a strong solution of Tile Doctor Remove and Go and after leaving to for ten minutes to soak in and soften the glue and paint. I was then able to carefully scrape of the glue and paint with hand scrapers. The floor was then deep cleaned with a 200-grit diamond pad on a weighted rotary machine. The edges and corners were done by hand with diamond blocks. The floor was then rinsed with water and the soil extracted with a wet vacuum. Last stage of the cleaning process was to give the floor an Acid Wash with Tile Doctor Grout Clean-Up to further clean up the floor and neutralise any efflorescent salts that may have been present in the tiles. Efflorescence can be a big problem for old floors like these which don’t have a damp-proof membrane. I gave the floor another rinse and extraction before leaving for the day and left the floor to dry out overnight.

Sealing a Victorian Tiled Hallway

On return both the floors were checked for moisture with a damp meter to ensure they were dry. The readings were good, so I proceeded to start the long process of applying the sealer. On this occasion I chose Tile Doctor Colour Grow sealer, main reasons being its fully breathable so will cope well with any moisture evaporation due to there being no damp-proof membrane also its really good at bringing out the colours in the tiles. Three coats were applied, allowing each coat to dry before applying the next. I then buffed off any excess with a white pad.


The new sealer really brought the Victorian tiles to life and allowed the colour and geometric patterns in the Victorian hallway floor to shine through.




Source: Victorian Floor Cleaning and Sealing Service in Birmingham

How to renovate a Victorian Tiled Hallway

The owner of this beautiful Victorian tiled hallway floor in Dinnington had wanted the floor restored for quite some time. The property had many Victorian features, but this floor had an unusual design which made it very special. The owners had researched how to clean it themselves but hadn’t managed to achieve the result they were hoping for. The main problem was that the floor had been spotted with small paint splashes from decades of decorating.


Dinnington officially forms part of in Rotherham and is the same distance from Rotherham as it is from Sheffield. The area was a big coal mining and steel producing area and unfortunately suffered huge job losses throughout the 80’s and 90’s so its not surprising that the local housing stock suffered for many years as a result.

Cleaning/Repairing a Victorian Tiled Hallway Floor

We first treated the floor with Tile Doctor Remove and Go, this acts quickly to break down any old sealers still present on the tiles and softens the old paint splashes. After a ten-minute dwell time a coarse 200-grit burnishing pad fitted to rotary floor buffer was applied to the tiles. More water was applied where required to help lubricate the process and make the pad really work its magic. The slurry generated was extracted using a wet vacuum and the floor inspected. The process was the repeated to ensure all the dirt was removed and the floor was as clean as possible.


Once happy the Victorian tiles were as clean as the could be it was time to give the floor an acid wash which would remove any old mineral deposits including grout smears. We also recommended this for old Victorian floors which do not have a damp-proof membrane installed and can suffer from white efflorescent salt deposits as moisture rises through the tile. To do this Tile Doctor Acid Gel was scrubbed into the to the floor using a 200-grit burnishing pad to make the acid gel work hard. Afterwards we rinsed the floor several times removing the slurry with a wet vacuum. This kept the mess to a minimum and the floor was already looking great.


The floor was left to dry over the weekend, and we would return the following week to carry out the sealing process.

Sealing a Victorian Tiled Hallway Floor

The following Monday we returned to seal the floor. First, we used the moisture meter to test the floor, we needed to ensure it was as dry as possible before sealing it. The client wanted a traditional look, so we opted for Tile Doctor Colour Grow which is a colour enhancing sealer that leaves matt finish. This product is perfect for this type of floor as it is fully breathable allowing moisture to pass through the tile and sealer and not become trapped under the floor where it could spread to the walls and cause rising damp.

Four coats of Colour Grow were applied in total allowing each to dry before applying the next. The sealer works by occupying the pores in the tile thereby protecting the floor and preventing dirt from becoming trapped making it much easier to clean.

I was very happy with the result; the floor was now in great condition and was one of the more dramatic in colour and pattern that I had come across. My customer also felt the same and left the following feedback for me.

"Matt did a professional and thorough job: our Victorian hall tiles really 'pop' with colour. Highly recommend. Karen T, Dinnington"




Source: Victorian Tile Cleaning and Sealing Service in South Yorkshire

How to Repair a Classic Victorian Tiled Hallway

This property located near the pretty market town of Ulverston was built in 1874 as inscribed on the front of the building. The Victorian Tiled floor comprised of Cream and Black tiles was original from when the house was built so that made the tiles at least 145 years old, in fact this was one of the oldest Victorian tiled floors I have ever worked on.


The floor was in good condition for its age but had experienced problems with broken and loose tiles around two of the door thresholds which is a common problem with floors of this age. Unfortunately, those tiles had been lost over the years and now the customer wanted this part of the floor rebuilding as part of the restoration. Fortunately, these tiles are still popular so finding suitable replacements wasn’t a big of a challenge as you might think.


I discussed with the client what needed to be done and after finding a suitable supplier for the replacement tiles was able to produce a quote which was accepted, and we agreed a price for the work.

Repairing a Cream and Black Victorian Hallway Floor

My first task was to rebuild the areas of broken and missing tiles. For the larger areas I mapped out a suitable pattern and set about cutting the replacement tiles to fit. A thick bed of flexible rapid set floor adhesive was applied to the floor and the replacement tiles bedded into the old cement base. Once the adhesive had hardened the tiles were grouted, cleaned-up and left to dry.


There were several areas that needed this treatment, so the work took some time to complete.

Cleaning/Repairing a Victorian Tiled Hallway Floor

Returning the next day, I first checked that the replacement tiles had set and that there were no further problems that needed addressing. All was well so I began cleaning the floor using a 200-grit followed by a 400-grit Diamond pad fitted to a weighted buffing machine running at slow speed and lubricated with water. The floor was rinsed with water after each pad and then the soil extracted using a wet vacuum.

The floor was then given an acid wash using Tile Doctor Grout Clean-Up, which at this stage acts in two ways for these old floors:

1. The Tile Doctor Grout Clean-Up product is made from Phosphoric Acid (not a brick Acid, which is a lot cheaper, more widely available but too strong for use on tile.) The acid we use works with us not against us and gives us time to change the pH of the floor to a slightly acidic pH. This is important on old floors like these where no damp proof membrane has been installed and it’s important to counter any alkaline salts in the floor which could lead to efflorescence later.

2. The sealer will bond to the surface a lot better when it has had this treatment and as a result you get a sharper cleaner finish.


Once done the floor was given another rinse and extraction with water and the wet vacuum and then left to dry out for a few days,

Sealing a Victorian Tiled Hallway Floor

We returned as promised to seal the whole floor using a couple of coats of a breathable colour enhancing sealer called Tile Doctor Colour Grow. As you can see form the pictures this really brought the hallway floor to life. Colour Grow works from the inside by occupying the pores in the tile and will protect it from ingrained dirt staining going forward.


It’s very important for a customer to use the correct cleaner after having there tiles cleaned and sealed professionally as using the wrong product can prematurely degrade the sealer. As a result, we recommend Tile Doctor Concentrated Neutral Tile Cleaner, its pH balanced and will not upset the sealer, thus getting maximum longevity out of the whole process.




Source: Victorian Tile Cleaning, Restoration and Sealing Service in South Cumbria

Restoring the Beauty of a Victorian Tiled Hallway in Northamptonshire

I recently visited a property in Wellingborough to survey their Victorian Hallway floor and work out the best method and products to restore it. The tiles were extremely dirty as the sealant had worn off allowing dirt to become ingrained. They had not been maintained for many years and there was evidence of adhesive which was due to a carpet being stuck down at some point in the past.


To restore the Victorian floor, I would need to remove the glue and give the tiles a professional deep clean to extract the years of ground-in dirt and staining. Following this the tiles would need sealing in order to protect them going forward. After discussing the work in detail with the owner I sent over a quotation by email which was accepted, and a date arranged for work to commence.

Restorative Cleaning of Victorian Hallway Tiles

On my return I applied a cocktail of Tile Doctor Oxy-Gel and Tile Doctor Nano-Tech HBU to the tiles. This creates a strong cleaning/coatings remover that would soften the embedded soiling and glue making it easier to remove. I left this to dwell on the floor for about an hour so it could break down the soil and adhesive. I then fitted a coarse 100-grit diamond pad to a rotary floor buffer and scrubbed the floor vacuuming up the resulting residue as I went along working in small sections of 2/3 metres at a time. I then repeated the process using a 200-grit pad, rinsing and extracting afterwards with water to remove the fine slurry this process generates.

Old floors like these were laid before the invention of the damp proof membrane which can result in moisture rising through the floor as it evaporates potentially leaving alkaline salt deposits on the surface. This process is known as Efflorescence and although I minimised the use of water during the cleaning process, I was concerned that this may still present a problem later. To neutralise any alkaline salts in the floor that could cause this problem my last action for the day was give the floor an acid wash using Tile Doctor Acid Gel.

Once this was done and extracted from the floor, I followed up with a further clean using Tile Doctor pH Neutral Tile Cleaner which was applied with a microfibre cloth. I left the floor to dry off overnight so it could be sealed the next day.

Sealing Restored Victorian Hallway Tiles

On day two I used a damp meter to check the moisture levels in the floor to ensure it had dried overnight. The results were good, so I set about applying the sealer. For this floor I decided to go with three coats of Tile Doctor Colour Grow which is an impregnating sealer that as well as protecting the Victorian tiles form staining also enhances the colours in the tile. This sealer is also fully breathable so any moisture will be able to evaporate up through the tile and not get trapped under the floor where it could cause problems.


Before leaving I also discussed maintenance cleaning with the customer and left them a bottle of Tile Doctor Neutral Tile Cleaner which is safe to use on sealed floors and will help keep the tiles looking at their best. It’s supplied in concentrated form so it should last them some time before they run out. The customer was very happy with the end results and has left positive comments on our website:

Very happy with the restoration of my Victorian tiled floor, cleaned, sealed and polished bringing it back to life. Phil was prompt to get back to me with any aftercare questions/queries/visits. Paula B, Wellingborough




Source: Victorian Tile Cleaning, Restoration and Sealing Service in Northamptonshire

Renovating a Salt Stained Quarry Tiled Floor in Cambridgeshire

We were called out to quote for restoring this Quarry tiled living room & hallway for a building contractor in the local area of Wicken. This is a small village on the edge of The Fens near Soham in East Cambridgeshire.

The works needed to be completed at short notice as the property was due to be put up for rent, so I agreed to work over two evenings to make sure it was ready for the first tenant. We discussed the cost and the process, and the contractor was happy to go ahead. We can always be flexible with our diary to help out our clients.


The floor had signs of alkaline salt efflorescence which had left white patches on the tiles, this problem is usually indicative of a damp issue but when I went over to survey the floor, I checked with a damp meter and couldn't find any evidence of dampness. Clearly something had happened in the past and as the floor dried out it left these white salt deposits on the surface.

Cleaning a Quarry Tiled Living Room and Hallway Floor

To remove the salt stains the floor was given an Acid Wash several times with Tile Doctor Grout Clean-Up worked in with a stiff brush pad fitted to a rotary machine. The acid in the product counters and removes the alkaline salts, it also cleans up the tiles of any other mineral deposits such as old grout smears. The floor was then rinsed with water to remove the now soiled solution and then extracted using a wet vacuum.

Once I was happy that the salts had been removed, we applied Tile Doctor Remove and Go to strip the quarry tiles of old sealers. This is a non-flammable, multi-purpose stripper which is safe to use on tiles and works best when left to soak into the tile for ten minutes first. This product also draws out ingrained stains and removes heavy grease build-up and any ingrained dirt. We used the rotary machine again fitted with the stiff brush as before to get the floor nice and clean. As before the floor was rinsed with water and the soils extracted using the wet vacuum.

The floor was then left to dry overnight in preparation for the sealant to be applied.

Sealing a Quarry Tiled Living Room and Hallway Floor

Upon arriving the following evening, the floor was checked again with the damp meter to make sure it was dry, all was well, so it was then sealed with multiple coats of Tile Doctor Seal & Go. This provides both a stain resistant surface seal and a durable low-sheen. The sealer brought back the deep colour in the tile and made a huge difference to the look of the floor. It would also make the floor much easier for the new tenant to maintain going forward.

You can see from the pictures the transformation that was achieved. The client was very happy with the completed work and was satisfied he would now be able to rent the property out to his next tenant.




Source: Quarry Tile Cleaning and Renovation Service in Cambridgeshire

Reparing and Restoring a Victorian Halway Floor in Devon

The owners of this floor in the hallway of their Mid-Victorian farmhouse in Clyde Hydon just outside of Honiton, in Devon asked me to visit shortly after they had moved in. Whilst ripping out the old carpet throughout the house they had come across this stunning Victorian tiled floor. Honiton is a market town, more well known for its lace making. As it is my home town, it was a very short commute to work for me, so I was able to visit the property quickly and take a look.


During my visit I took some moisture readings because these old floors will not have had a damp proof membrane installed and if the moisture levels are too high it can restrict when this type of work can be done due to the sealers needing the floor to be dry(ish), in order to cure. I also did a test clean to show the customers what level of cleaning could be achieved and looked at areas of loose tiles to see if any replacement tiles would need to be sourced. I always like to do a test clean as it demonstrates what can be achieved and it also allows me to work out which methods and products work best.

Cleaning and Repairing a Victorian Tiled Hallway Floor

With the customers happy with the quote I returned to complete the work starting by covering the wooden skirting and bottom of the stairs to protect the paint and carpet from splashing. I then applied a strong dilution of Tile Doctor Pro-Clean on to the floor, ensuring even coverage and keeping an eye on the floor to make sure that it didn’t dry out. Pro-Clean is quite a flexible product than can strip off old sealers when applied in a strong dilution.

After a short time, I set to work scrubbing the Pro-Clean into the floor with a 400-grit diamond pad fitted to a rotary floor buffer. I also used 400-grit hand held burnishing block to cover the corners and any edges not reached by my machine. Once I was satisfied that the tiles were as good as they could be I rinsed the floor to remove the now soiled alkaline cleaner before giving the floor an acid wash with Acid Gel to neutralise with any inherent salts in dfdfthe tiles.

Before I left for the day I fixed the loose tiles back in place, re-grouted the areas that I had replaced tiles and left an air mover on the floor to aid in the drying process. I also suggested that the radiators in the hallway were turned on overnight to further aid the drying process. Occasionally these types of floors need to be left for several days to dry but it is worth the wait and the floors can be used in the meantime provided only socks and indoor shoes are used and care is taken not to get the floor dirty.

Sealing a Victorian Tiled Hallway Floor

Upon returning the next day I tested the moisture content of the floor and was pleased to find that it was well within acceptable levels for the application of the sealer that I was planning to use. I quickly checked the floor for areas that I felt may be able to be improved and once satisfied a single coat of Tile Doctor Colour Grow sealer was applied to the floor. Colour Grow is a colour enhancing impregnating sealer that occupies the pores in the tile thus preventing dirt from becoming ingrained there.

Once this was dry it was followed up by applying two further coats of Tile Doctor Seal and Go Extra which is a compatible surface sealer that leaves a nice subtle sheen finish. Both sealers are fully breathable and able to cope with any damp issues that may impact the floor over time.


The customers were thrilled and said that they were going to reinstate the hallway as the main entrance to the farmhouse in order to show it off to all their visitors!


Source: Victorian Tile Cleaning and Restoration Service in Devon

Victorian Hallway Tiles Renovated in Warwickshire

I was very pleased to be contacted by this client, they lived on a lovely residential road near the centre of Rugby in Warwickshire and the house featured a beautiful Victorian tiled hallway floor. As you will see from the pictures the patterns are stunning.


Over the years it had been badly damaged along the edges and a few tiles were cracked. It's difficult to know the cause of the damage but we normally find problems like these can be caused by settlement in the floor and if heavy objects are dropped on the tiles. High traffic areas such as the hallway do get a lot of general wear and tear which takes its toll on the floor. The owner of the house felt embarrassed with the condition of the floor and had decided it was time to have it restored.

Cleaning and Restoring a Victorian Tiled Hallway Floor

I identified the colours used in the floor, so I could source replacements and went through the floor with the client to mark the tiles that needed changing. We left a few tiles with minor damage so that the new tiles did not stand out and kept the floor authentic.

I managed to source some replacement tiles and started the job by removing and replacing all the damaged and loose tiles. Many of the replacements had to be hand cut to size, especially in the corners. It took some time but eventually, all the damaged tiles were removed and replaced, and the loose tiles refitted. The floor was then left for a few days to set.

On my return, I started by giving the floor a deep clean by spraying the tiles with a strong dilution of Tile Doctor Remove and Go. This was left on the tiles to soak in and break up the bonding agent in the old coatings. After ten minutes I worked the solution into the tiles with a black scrubbing pad fitted to a rotary floor buffer and then rinsed the resulting soil off the floor with water and extracted it using a wet vacuum.


The next step was to give the floor an acid wash using Tile Doctor Acid Gel, we don’t normally use acidic products on tile or stone however they are particularly good at dealing with alkaline mineral salts and removing grout smears. Old floors like these are particularly vulnerable to a natural process called efflorescence which results in white mineral salt deposits being left on the surface of the tile as the floor fully dries out and can interfere with the sealer. To counter this, the floor was given an Acid Wash with Tile Doctor Acid Gel which being in Gel form makes it particularly easy to control. The acid in the gel works by neutralising the alkalinity in the floor. The solution was scrubbed into the floor using a coarse diamond encrusted burnishing pad to improve the finish of the tiles and then thoroughly rinsed with water and extracted with a wet vacuum to remove any trace of cleaning product.

Sealing a Victorian Tiled Hallway Floor

After leaving the floor to thoroughly dry out over a few days I returned to complete the sealing process. On my return, the floor was sealed with few coats of Tile Doctor Seal and Go Extra which leaves a nice satin finish and being a fully breathable sealer is ideal for old floors that have no damp proof membrane and needs moisture to rise through the tile, so it can evaporate.


The vibrant colours of the tiles were brought back to life and the floor was transformed. The client was delighted and wondered why they had not called upon us sooner!



Source: Victorian Tile Cleaning and Renovation Service in Warwickshire