How to Install Brick Tiles on a Backsplash

 How to Install Brick Slips on a Splashback

Adding a coordinating splashback made from brick-effect tiles (or brick slips) creates character and visual interest for your bathroom or kitchen. If you have leftover tiles from a previous project, such as tiling a worktop or shower enclosure, creating a splashback is a perfect way to use them. If purchasing new tiles, it is highly recommended to compare sample tiles against the rest of the room's colours and decor to ensure they coordinate harmoniously.

What You'll Need:

• Tape measure

• Cleaning cloths (old t-shirts work well)

• Notched trowel

• Brick slips / Brick-effect tiles

• Waterproof tile adhesive

• Tile spacers

• Screwdriver

• Spirit level

• Tile cutter

• Work gloves

• Grout

• Grout float

• Pencil

Step 1: Measure and Prepare the Splashback Space Begin by measuring and marking off the wall space where you will install the splashback. Make pencil marks at each top corner and in the centre so you know exactly where the top edge will sit. Standard splashbacks begin at the edge of the worktop and are typically raised between 10 and 20 centimetres high, depending on the size of the tiles, the worktop dimensions, and your desired look.

Inspect the wall area to ensure there are no cracks, uneven patches, or glossy paint that might interfere with the installation. Sand down any gloss paint and wipe away the dust with a damp cloth. Fill in any noticeable wall cracks and allow the filler to dry overnight before continuing.

Step 2: Apply Tile Adhesive Once your wall area is marked, patched, and cleaned, you are ready to secure the tiles. Construction-grade tile adhesive can irritate the skin, so wearing work gloves is recommended. Adhesive dries fairly quickly, so work in small sections at a time. The adhesive for your first tile should be applied at a thickness of 1.5 to 3 millimetres—enough to grip the tile securely, but not so much that it seeps out from the edges.

Step 3: Add Tile Spacers After attaching your first two brick slips, place a tile spacer between them at each corner. For spacers located at the corners where the splashback meets the worktop, you may need to snip off one end of the spacer with scissors to make it fit flush.

Step 4: Set and Level Tile Rows Once you have finished your first row, check that the tiles are perfectly straight using a spirit level, making any necessary adjustments. Continue laying the rest of the rows in the same manner. To create an authentic brick bond pattern, offset each row by exactly half the length of a single tile. Continue checking with your spirit level as you progress. Once all rows are completed, wipe away any excess adhesive. Finally, apply grout to your new splashback according to the manufacturer's instructions.

Source: www.DoItYourself.com

How to Cut Porcelain Tile

 Trying to cut porcelain tiles yourself isn't nearly as daunting as it might seem. Whilst porcelain can be fragile, any DIYer can easily manage the task of cutting them neatly. The secret lies in the cutting equipment you use. With the right cutter, you'll be able to cut any porcelain tile like a pro.

What You'll Need:

• Manual tile cutter

• Pencil

• Tape measure

• Porcelain tile

Step 1: Set Up Your Workspace Find a safe area to work on cutting your tiles. The space needs to be large enough to hold all your cutting equipment and your tiles, whilst also giving you plenty of room to move around freely.

Step 2: Take Your Measurements Use your tape measure to measure the exact area on the tile where the cut needs to be made. Mark this with a pencil to ensure you make accurate cuts.

Step 3: Start Cutting Place the tile on the manual cutter. To stop it from slipping or moving while you cut, push it firmly against the cutting guide (or tile stop).

Score the tile by gently pushing the cutter handle across it. This will create a small score line on the surface of the tile. Once scored, apply firm pressure to the cutter handle to snap the tile along the line and complete the cut.

You don't need to apply excessive force to cut porcelain tiles neatly. A medium amount of pressure is all you need for a perfectly clean break.

Source: www.DoItYourself.com

The Easiest Way to Tile a Backsplash

Installing a splashback is one of the most effective DIY projects for transforming a kitchen. It is a manageable task that, with the right tools, can yield a professional finish while saving on labour costs.

What is the Easiest Splashback to Install?

1. Vinyl Stick-On: The simplest option. These come in sheets or individual "tiles" with a peel-and-stick backing. They can be installed over paint, wood, or even existing tiles. They are easy to wipe clean and ideal for renters as they can be removed without surface damage.

2. Paint: A budget-friendly solution where you can mark out designs to mimic patterns or solid blocks of colour.

3. Beadboard: Available in pre-fabricated kits or sheets. For kitchens, bathrooms, or utility rooms, choose vinyl beadboard over MDF, as MDF can swell in moist environments.

4. Faux Tile and Brick: Thin, lightweight sheets that can be stuck over existing splashbacks or plain walls using a small amount of adhesive (like Gripfill or Liquid Nails).

5. Laminate Flooring: You can use leftover laminate flooring on walls. Unlike flooring, which "floats," these must be tacked into place using a brad nailer.

6. Real Tile: For the easiest experience with real ceramics, use pre-fabricated tile sheets. These are real tiles pre-mounted on a mesh backing, ensuring consistent spacing and a much faster installation.

---

Step-by-Step Installation Guide

Step 1: Measure Your Space

Measure the width and height of every section. Identify "stop points" like the underside of a wall cupboard or a window sill.

• Top Tip: Plan your layout so you end with whole tiles at the top where possible to avoid difficult lengthwise cuts (ripping).

Step 2: Factor in Material Waste

Always buy 10% more material than required. You will have odd cuts around corners and electrical sockets, and some tiles may break. Keep offcuts for future repairs or mosaic work.

Step 3: Identify Your Starting Point

• Corners: Start at the corner and work outwards in both directions.

• Long Walls: Start in the centre and work towards the edges.

• Focal Points: If you have a window or a range cooker, start there and work outwards to maintain symmetry.

Step 4: Protect the Area

Cover worktops, hobs, and sinks with dust sheets, newspaper, or heavy-duty bin liners. Ensure the protection doesn't cover the specific part of the wall you are tiling.

Step 5: Set Up a Wet Tile Saw

For ceramic or porcelain, an electric wet tile saw is recommended. It uses water to cool the diamond blade, preventing sparks, burn marks, and cracking. Ensure the reservoir is filled and the saw is on a stable, flat surface.

Step 6: The First Row

Mark the centre of the wall and "dry fit" (place without adhesive) the bottom row. Use tile spacers between every tile and between the tiles and the worktop. Once satisfied, apply tile adhesive to the back of each tile with a trowel and press into place.

• Crucial: Use a spirit level on this first row. If the foundation is slanted, every row above it will be crooked.

Step 7: Continue Tiling

Work your way up the wall. You can stack tiles vertically for clean lines or stagger them for a "brick" look. Remove any adhesive that squeezes out onto the front of the tiles immediately; do not let it dry.

Step 8: Cutting Tips

• Apply painter’s tape to the tile before marking your cut line to prevent chipping.

• Always cut with the finished "face" up.

• For complex cuts (like around a light switch), make several parallel "finger" cuts into the waste area with the saw, then snap them off with tile nippers and tidy the edge.

Step 9: Grout

After the adhesive has cured for a few days, remove the spacers. Apply grout using a grout float, pressing it into the gaps with a diagonal motion. Work in small sections. After a few minutes, wipe away excess grout with a damp (not soaking) sponge.

Step 10: Caulking

Apply a bead of silicone sealant (caulk) where the tiles meet the cabinets and the worktop. This provides a finished look and prevents water from getting behind the tiles.

---

Pro Hack: Adhesive Mats

Instead of using traditional wet adhesive (mastic), you can use tile adhesive mats. These act like heavy-duty double-sided tape. Apply the mat to a clean, dry wall, peel off the front backing, and stick your tiles directly onto it. You can grout immediately afterward without waiting for the adhesive to dry.

Source: www.DoItYourself.com

Improving a Balcony With Encaustic Cement Tiles in East London

This client from Hackney had started a DIY tiling job using modern Encaustic Cement tiles on an external balcony. The COVID-19 lockdown had just taken effect and it seemed like a great opportunity to get a few DIY projects done. Although it started off well, she began to struggle when having to cut the edging tiles and corners so was forced to leave the tiling incomplete and un-grouted. Furthermore, she had attempted to seal the tiles, but this had somehow caused the tiles to go milky white. Encaustic tiles date back to medieval times and have been popular in the UK since the nineteenth century and have become extremely popular here in the last few years.


Concerned the whole project would need ripping up and starting again she contact Tile Doctor and I arranged a visit to the property to assess the tiling and see if the project it could be rescued. Since the COVID-19 epidemic began we have adopted new working practices such as more PPE and Social Distancing to allow us to continue working.


We test cleaned the sealer and found the application of a 400-grit diamond pad was the best way to clean off the sealer and renovate the tile. Additionally, we had been asked to complete the tiling project which was approx. 24m2. The job would therefore entail tiling, cleaning, and sealing so it took a little while to calculate the quote which was accepted.

Cleaning/Repairing an Encaustic Cement Tiled Balcony

There was a lot of work to do and so I teamed up with fellow Tile Doctor Andrew Newstead for this job working as a two-man team. It took three days to complete the tiling and the grouting, then we returned the following week to allow the adhesive and grout to fully dry over the weekend. The next step was to clean the area the customer had previously laid and sealed to remove the old sealer that had damaged the colour and look of the tiles. For this we used water and a series of 400, 800 and 1500-grit diamond pads. This gradually removed the sealer and brought the tiles back to a more natural finish. We suspect the reason her tiles went milky was she hadn’t buffed off the excess sealer but luckily, we were able to fix it.

Sealing an Encaustic Cement Tiled Balcony

We then returned for one more morning, buffed tiles with a 3000-grit pad to further enhance their appearance and then seal with two coats of Tile Doctor Colour Grow. Colour Grow is an impregnating sealer that improves colour and works by soaking into the pores of the tile preventing dirt from becoming ingrained there.


I’m pleased to say the whole job went smoothly and our client was pleased (see feedback below) that they could finally use their balcony which I’m sure has been in constant use since.

Plenty of problems to solve with my half-finished roof terrace, which were solved cheerfully and carefully. By Gemma M, Hackney, 27 May 2020

Source: Patio Tile Cleaning and Renovation Service in East-London