How to Restore Old Quarry Tiles Covered by Vinyl

The owner of this property in the South London suburb of Cheam got in touch about restoring a Quarry tiled floor that had been covered with Vinyl tiles. After surveying the floor, it became clear that some of the original Quarry tiled floor was missing and had been replaced with concrete before covering with Vinyl.

     

To fully restore the Quarry tiles floor, it would therefore be necessary to dig out the concrete sections and tile with matching quarry tiles which had been supplied by the client. Once done we would then need to renovate both the old and the new sections of floor and seal them to achieve a consistent appearance. I was also asked to dig out an old matwell and prepare it for a new mat as part of the work.  

This was a large job, but following a site visit I was able to provide my client with an accurate price and arranged a time to carry the work out which would take five days.

    

Removing Vinyl Tiles

The first part of the job was to lift the existing Vinyl tiles which had been laid on top of the Quarry tiles. I used a heat gun to help loosen the adhesive and then assisted with a steamer scrubbed Tile Doctor HBU Nanotech stripper into the floor to remove the glue and bitumen from the surface of the newly exposed Quarry tiles.

    

Restoring the Appearance of a Quarry Tiled Floor

The soiled solution was extracted with a wet vacuum and I followed up by giving the Quarry tiles an acid rinse using Tile Doctor Acid Gel. The Gel is applied to the tiles and then scrubbed in with a Black pad fitted to a rotary machine. This process removes old traces of cement and grout from the quarry tiles and further cleans them up. After this the floor was rinsed thoroughly and the soil extracted with a wet vacuum.

   

The next focus was on digging out the concrete areas mentioned earlier and then preparing the subfloor for tiling with self-levelling compound, which of course needs time to set. Once ready the replacement tiles were fixed in place making cuts as necessary and placing them to follow the original floor pattern. This may sound quite this sound straight forward, but this part of the job took some time to complete. The floor was left for a couple of days so the new tiles could set and the whole area could dry out before sealing.

 

Sealing a Quarry Tiled Hallway Floor

I returned later to seal all the Quarry tiles with Tile Doctor Colour Grow which brings out the deep Orange colours in the tiles whilst adding protection from staining and ingrained dirt. This sealer works by occupying the pores in the tile so dirt cannot become ingrained there. Four coats of sealer where applied across the whole floor leaving a nice matt finish that was consistent across the whole floor.

Before leaving I discussed with the client the best way to maintain the floor in the future and recommended the use of Tile Doctor Neutral Tile Cleaner which is a pH neutral cleaner. This is important as its gentle enough to use frequently and won’t strip off the newly applied sealer like many household floor cleaners will. Its supplied in concentrated form so a small amount of cleaner goes a long way.

The client was delighted with the results, they were very pleased to see the back of the tired Vinyl floor and pleased the floor now looked consistent throughout.

   

Source: Quarry Floor Tile Cleaning and Renovation Service in South London

How to Restore and Extend a Victorian Tiled Hallway Floor

This client had recently moved into an older property in Bridgend and having pulled up the previous hallway covering had found a heavily soiled Victorian tiled floor underneath. However, for some reason we never discovered the answer to it only ran from the porch to the foot of the stairs which I guess explains why it had been covered up and neglected.


The client asked if we would be able to restore the existing Victorian floor and if would be possible to extend the tiling throughout the hall continuing the original pattern. Cleaning the original floor and completing the tiling work didn't present a problem however it can be tricky finding tiles to match the pattern of the original floor. Unsure if it could be done, I offered to do some research and get back to him once I had found a workable solution.

Fortunately, there are still a few suppliers that produce tiles and after speaking with other members of the Tile Doctor network I was able to source matching tiles. The owner was still keen to proceed and so I agreed a price, placed an order for the tiles and scheduled a date to start the work.

Cleaning and Repairing a Victorian Tiled Hallway Floor

Before starting the tiling work, I applied a latex levelling compound to bring the height of the floor we were going to lay up, level and flush with the existing Victorian floor. After allowing the latex to dry and now having an equally level surface, we were ready to begin laying.


Laying a tiled floor to match an existing pattern is a tricky process as your constantly having to check the geometry of the pattern as well as keeping everything in line with our levels. Another issue we ran into with this job was the new tiles that we had ordered, all differed in width from the originals which made it a very long strenuous process having to cut them to fit.


Once the floor was laid and had dried out it was time to turn our attention to the original floor which needed several deep cleans. For this we used Tile Doctor Pro-Clean which was worked in with a black scrubbing pad to release all the ingrained dirt from the tile. The dirt was then rinsed off and extracted with a wet vacuum.

Sealing a Victorian Tiled Hallway Floor

The job took eight days in total and ended with the application of five coats of Tile Doctor Seal and Go sealer. Each coat is left to dry before applying the next. This seal gives the floor protection and a lovely finish. This final step of sealing really brought both floors together and left the subtle sheen finish the client requested.

For aftercare I left the client a bottle of Tile Doctor Neutral Tile Cleaner, which we recommend for cleaning sealed tiled floors. Neutral clean has a pH neutral formula which won’t harm the sealer like stronger cleaners which can prematurely strip a sealer off the floor.




Source: Victorian Tile Cleaning and Restoration Service in Swansea

Repairing Victorian Hallway Tiles in Worcestershire

The young couple who owned this house was in Kidderminster were expecting their first baby and wanted the original hallway floor repaired and restored in keeping with the Victorian house. Before contacting us, they had spoken with a builder who had said it was beyond repair and recommended ripping it up and laying a new floor. They were aware of the value that original features like floors can add to a property so undeterred they kept looking for a solution and found Tile Doctor.


I am the local agent for Tile Doctor in Worcestershire and specialise in the restoration of old tiled floors so after popping round to take a look I was able to confirm that their builder was wrong and there was no reason why the floor couldn’t be restored. Relieved the floor could be restored they happily asked me to do the work and we arranged a date, it also turned out that he was also a fellow Mod and scooter rider, so we had plenty to talk about.

Repairing a Victorian Tiled Hallway Floor

I returned to the property a few weeks later with my tiler and we began the work of carefully inspecting the floor to identify, remove and refit loose tiles. This was followed by repairs to the screed base and then cutting new matching tiles to replace those that were missing. Having worked on old Victorian and Edwardian tiles for some years now I have built up a collection of re-claimed tiles and often scan eBay for them as I know they will come in handy at some point in the future. The repair process took three days to complete as naturally each tile needs to set in place and can only be grouted in once the adhesive has gone off. It’s also delicate work as anything out of place in the pattern of the floor would be conspicuous obvious.

Cleaning a Victorian Tiled Hallway Floor

On the fourth day the tiling work was complete, and I set about giving the floor a thorough clean starting with the application of Tile Doctor Remove and Go to remove any remnants of sealer, paint splashes from decorating and other marks. The solution was left to soak into the tile and grout for ten minutes before being worked in with a scrubbing pad fitted to a rotary floor buffer running on slow speed. The soiled cleaning solution was rinsed off with water and extracted with a wet vacuum, any stubborn areas were then spot treated until I was happy the floor was clear. Using the same process, the floor was then treated to an acid wash using Tile Doctor Acid Gel. This served two purposes, first and acid wash will remove any fine grout smears and second the acid will neutralise any efflorescent salts that had built up in the tiles and could cause issue later. This is a common problem with old floors as they don’t have the protection of a damp proof membrane. The floor was then carefully rinsed down with water applied using micro fibre cloths, so it wouldn't get too damp and then left overnight to dry off fully assisted with a couple of air movers I had left in place.

Sealing a Victorian Tiled Hallway Floor

I returned the next day to seal the tiles checking first that the floor was dry by taking a few moisture readings with a damp tester. The air movers had done the job and I was able to crack on applying numerous coats of sealer which will protect the tile going forward and also enhance its appearance. My choice of sealer was Tile Doctor Seal and Go Extra which is a fully breathable sealer that can cope with moisture rising through the tiles, it also adds a nice sheen to the tile and works extremely well on clay-based tiles such as these. Over the course of the five days the floor was transformed, and my customer was over the moon and I was happy to have saved yet another floor.




Source: Victorian Tile Cleaning and Restoration Service in Worcestershire