 |
 |
Fortunately, the gripper rods had only been lightly glued onto the tiles and not held down with nails, sometimes with older floors the rods are hammered in place right through the tile causing them to shatter, which makes for a much larger restoration job. I gave them a price for the work which they were happy with, and we arranged a time to return.
Cleaning a Victorian Tiled Hallway Floor
To remove the traces of rubber backing, adhesive and years of stubborn soiling from the tiles the whole floor was soaked in a strong dilution of Tile Doctor Remove and Go. After a short dwell time we then machine scrubbed with Tile Doctor Pro-Clean to restore the tiles to a very clean condition.The soiling and products were pressure rinsed and vacuumed away, leaving the Victorian tiles much cleaner. I found the best method was to work in large sections of flooring at a time which allowed for the tiles to dry whilst I worked on another section. I was then able to go back and review my work and spot clean stubborn areas until I was satisfied with the result. The wet vacuum removes a lot of the moisture but it needs to be dry before sealing so the floor was then left to dry off overnight.
Sealing a Victorian Tiled Hallway Floor
The following day we returned and using the damp meter tested the tiles were dry and ready to be sealed. For this we selected to use seven coats of Tile Doctor Seal and Go, these were applied leaving each coat to dry before the next one was administered. This left a nice sheen finish on the floor and does a lovely job of enhancing the colours making the tiles look vibrant again. The floor looks great and the hallway is now very inviting.
