Cleaning a Semi-Riven Brazilian Slate Tiled Kitchen Floor
The first job was to apply a strong dilution of an alkaline detergent called Tile Doctor Pro-Clean which was applied and left to dwell for several minutes before agitating with a rotary floor buffer fitted with a scrubbing pad. A stiff brush was also run over the grout lines to get them clean.I worked in sections and then used a hot water encapsulation system that is used a lot by carpet cleaners to remove the slurry and get the floor as clean as possible. After inspecting the floor, I could see a few stubborn areas than needed more work, so the process was repeated until I was satisfied the Slate tile and grout was as clean as it could be. The floor was then left to dry overnight
Sealing a Semi-Riven Brazilian Slate Tiled Kitchen Floor
The following morning, we returned, the floor looked nice and dry but I took several moisture readings with a damp meter just to be sure. All was in order, and I was able to progress onto the next step of applying a fresh sealer to the floor.For this type of tile and conditions I chose to apply Tile Doctor Seal and Go which is a water-based sealer (no smell as it dries) that works really well on Slate. Multiple coats were required and each coat is left to dry before applying the next. The seal is very hard wearing, perfect for high traffic areas such as the kitchen and it leaves a lovely sheen without making the floor appear too shiny.