Tuesday, January 10, 2017

Refurbishing Victorian Hallway Tiles in a Bedfordshire

When you discover an old Victorian tiled floor underneath carpet, the first question that will probably pop into your mind is: can it be restored? The answer, in the majority of cases, is yes. In fact, Tile Doctor has completed hundreds of Victorian tiled floor restorations. Victorian tiles have a timeless quality about them and are still popular for residential use even in the twenty first century. What you can usually expect upon lifting your carpet is for the tiles to be covered in carpet adhesives and grippers, as was the case with this particular example of a Victorian Tiles hallway floor at a property in Bedford. Sometimes you might also find paint splashes or other staining left over from decoration work. And, of course, the tiles will be dirty and in much need of a deep clean. These issues spoil the original appearance of the tiles, but with the right methods and products, a complete restoration can be achieved quickly and cost-effectively.

Victorian tiled floor Before Cleaning Bedford

My first task upon arriving at the proper was to carry out a site survey to address the condition of the tiles, before running a quick test clean on a small area of the floor. The result was good and so I was confident that I could achieve a high-quality restoration for the client.

Victorian tiled floor Before Cleaning Bedford

Cleaning Original Victorian Tiles

A quote was issued and accepted, and the work was booked in at a date that was convenient for the customer. Returning to the property, my first course of action was to mix a strong dilution of Tile Doctor Pro Clean, which is a powerful alkaline cleaner safe to use on natural stone, with hot water. This cleaning solution was sprayed along all edges of the floor loosen the glue securing the carpet grippers. I then successfully removed the adhesive carefully using handheld tools to avoid damaging any tiles.

Victorian tiled floor Before Cleaning Bedford

Once this was done, I applied Tile Doctor Remove and Go, scrubbing it into the tiles with a rotary machine. This product is designed to remove heavy soiling, paint splashes and old waxes and sealers. The soiled solution was then extracted using a wet vacuum and stubborn areas re-treated until I was satisfied the floor was clean. The entire floor was then given a thorough rinse with water to remove any trace of cleaning products and extracted using a wet vax machine.

Sealing Original Victorian Tiles

The floor was allowed to dry for several days before I was able to return to seal the tiles. It's always important to leave significant time for the floor to dry because any moisture left over can impact the performance of the sealer. The choice of sealer was Tile Doctor Seal and Go Extra, which provides robust protection against dirt and stains, with a light sheen finish. I chose this sealer not only because the customer wanted a light sheen finish, but also because this particular sealer is fully breathable. Dampness can sometimes be an issue with old Victorian and Quarry tiles which were installed before damp proof membranes became standard.

Victorian tiled floor After Cleaning Bedford Victorian tiled floor After Cleaning Bedford

The transformation achieved within the space of a week was quite incredible and the colours in the tile have really come through. Another satisfied customer!

Victorian tiled floor After Cleaning Bedford



Source: Victorian Tile Cleaning and Restoration Service in Bedfordshire