Renovating a Victorian Tiled Hallway

These photographs are from a dirty Victorian tiled hallway floor at a house on Mersea Island which is south of Colchester in the Colne Estuary. The tiles were in good physical condition but the sealer had worn down and dirt had become lodged in the pores of the tile causing them to look dull and faded.

Deep Cleaning Victorian Floor Tiles

To strip off any remaining old sealer and to give the tiles a good deep clean I applied a strong 1:3 dilution of Tile Doctor Pro-Clean with water and worked it into the floor using a rotary buffing machine fitted with a black scrubbing pad. The now soiled cleaning solution was rinsed off and extracted using a wet vacuum and I could see there were some stubborn stains that would need extra work. To tackle these I used a solution of Nanotech HBU cleaner which was applied and left to dwell for fifteen minutes before being scrubbed in using the black scrubbing pad as before. The dirty solution was then removed using a wet vacuum and the floor was rinsed thoroughly with water to ensure all trace of cleaning products was removed.

Sealing Victorian Floor Tiles

The Victorian tiles were left to dry out for a few days before we returned to seal the floor using numerous coats of Tile Doctor Seal and Go which is our recommended sealer for Victorian tiles as it gives a nice low sheen effect that enhances their appearance as well as protecting them from future staining.




Source: Victorian Cleaning and Renovation Service in Essex