How to Achieve a Deep Polish on Marble Floor Tiles

The pictures below are of a Polished Marble floor installed at a property in the village of Callow End which is a few miles South of Worcester. The owner of the house had attempted to clean and seal the floor by themselves and as you can see from the photographs, they ended up dulling its appearance. The physical nature of Marble and natural stone floors in general make them a difficult project to attempt without expert knowledge and the right equipment.


I arranged to survey the floor and explained to the client how I intended to restore the appearance of the Marble to how it should look. I demonstrated the process on a small test area so they could get an idea of the result and explained that the floor could look even better than the day it was installed. Tile Doctor has developed a system called burnishing for natural stone floors which involve the application of a set of diamond pads which are used in sequence to clean and restore the polish to the stone. My quote was accepted, and a date set for the work to begin which should take two days.

Cleaning and Polishing a Marble Tiled Floor

I arrived on the agreed date and started by sealing up the bases of the kitchen kickboards and skirting with silicone to protect against any damage from water ingress. I then vacuumed the floor to remove any debris and grit. Tile Doctor Stone Soap was then worked into the floor with the first of a set of diamond encrusted Burnishing Pads. The first pad is a coarse 400-grit pad and is run over each Marble tile four times. The floor is then rinsed with water and the soil extracted with a wet vacuum. This process was then repeated with an 800-grit, 1500-grit and then finally a 3000-grit pad which is applied dry with only a little water spayed onto the floor. Tile Doctor Stone Soap is a stone cleaning product designed for maintaining the patina on polished stone. Additionally, it has a sealer friendly pH Neutral formula which is ideal for floors like these. Many floor cleaning products you find in supermarkets are too harsh for use on natural stone and can cause damage over time (always read the label).

Sealing a Polished Marble Floor

Once the burnishing was complete the floor needed to be sealed to protect its’ final finish. Tile Doctor have a whole range of sealing products available but for a really durable shiny finish on Marble I recommend the application of Tile Doctor Shine Powder. This is a crystallising powder that provides a very high shine and tough durable finish, it’s worked into the stone using a white pad fitted to a rotary machine.


My client was absolutely delighted with the result and agreed the floor had never looked so good and lived up to the high standard I told them they could expect. For aftercare I recommended the use of Tile Doctor Stone Soap which will keep the floor clean and help maintain the deep patina that I had built-up on the Marble tiles.



Source: Marble Tile Cleaning and Restoration Service in Worcestershire

Achieving a High Shine on a Travertine Tiled Floor

This customer from Swansea was unhappy with the look of her Travertine floor tiles and so decided to call in tile doctor after she had seen pictures of other travertine floor tiles on one of our websites and wanted hers to look the same. The natural brown shades of her own Travertine tiles had become very dark and were looking dull and lifeless in comparison. It was clear to me that the Sealer was wearing thin with use and dirt had now penetrated the pores of the stone making it difficult to clean effectively. This is a common problem with stone floors and this is why Tile Doctor offer a maintenance service where we pop round once a year to top-up the sealer on your floor.

Stripping and Re-Polishing Travertine

To restore the polished appearance of the floor the stone would need to be stripped of any remaining sealer and dirt, re-polished and then sealed; we find the best way to achieve that is through the application of a set of Diamond encrusted burnishing pads. I started the burnishing process by fitting a coarse 400 grit no.1 burnishing pad to a floor buffer and running at a slow speed ran the pad across the whole floor. This coarse pad is designed to strip off old sealers and dirt from the tile. You use a little water to help lubricate and once complete it’s necessary to rinse the area with water to remove the soil that is generated. The next step is to start building back the polish with the 800 and then 1500 grit pads which are applied in the same manner. The floor was then rinsed again with water and I turned my attention to the grout which was scrubbed by hand using Tile Doctor Pro-Clean and a stiff brush. The floor was given another rinse and then inspected to ensure I hadn’t missed anything. Before leaving for the day I used the wet vacuum to extract as much moisture from the floor as possible.

Sealing Travertine Floor Tiles

On the second day I finished the banishing process with the application of the final of the four pads which is a very fine 3000 grit pad which adds a final polish to the surface leaving it looking shiny. This last pad is applied with a small amount of water spayed onto the tile in a process we call a spray burnish. The use of water is so small the floor remains dry enabling us to apply a sealer shortly afterwards. There are some beautiful brown shades in Travertine and so to really make them standout I sealed the floor using a couple of coats of Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that soaks into the pores of the stone protecting it from within. The sealer will also make ongoing cleaning and maintenance easier for the customer.


The customer was very pleased with the result and commented on how clean and deep the shine had come out using the Diamond pad system.


Before leaving I recommended the use of Tile Doctor Stone Soap as an aftercare cleaner, this produce is specially designed for cleaning polished stone, not only does it helps build patina, but it won’t prematurely erode the sealer like many acidic cleaners you find in the supermarket which should really only be used on ceramics and Vinyl tiles.


Source: Travertine Cleaning and Polishing Service in Swansea