Top 3 Laundry Room Floor Options

It’s important to have a good laundry room floor that can take water and all kinds of abuse. That might seem to limit the options, but in fact there are plenty of good flooring possibilities that will work in a laundry room.

1. Concrete

If your laundry room is in the basement, then you probably already have a concrete laundry room floor. It’s very serviceable and easy to clean up in the event of a leak from the washing machine. You don’t need to do anything to install the floor, either.

2. Linoleum

A linoleum floor offers several advantages as a laundry room floor. Since it’s in one piece, clean up is remarkably easy, and installing the linoleum floor is an easy procedure. If you have a leak from the washing machine you’ll be able to clean the mess up easily with a mop.

3. Tile

A well-grouted tile floor gives a solid base. As a laundry room floor it can work very well as long as there’s a good sealant on the top. The sealant is vital in case of a water leak or spillage; it will stop liquid soaking into the tile or grout. More than concrete or linoleum, tile forms an extremely attractive laundry room floor that will last well.

Source: www.DoItYourself.com

Floor Transition Molding: Options for Uneven Floors

Using floor transition is necessary when installing a new floor in your house. Where one floor meets another type of flooring, you will have to install some sort of transition piece. This will help you cover the gap and make it a smoother transition from one floor to the next. Here are a few options when you have to combine 2 uneven floors.

Wood or Laminate Transitions

When you install wood or laminate, the manufacturer of the floor should be able to offer you a transition piece that matches the floor. They make the transitions in a number of profiles and styles. Therefore, you should be able to find something that will work for you.

One type of transition that you could use whenever a wood or laminate floor is higher is a reducer. These are also sometimes referred to as a vinyl reducer. A reducer is a flooring transition that is higher on the side that goes over the edge of the wood. Then it gradually slopes down to the adjoining floor. This will provide you with a nice slope that forms a bit of a ramp up to the next floor.

If you need to, you can even adjust these transitions a bit by sawing off part of the bottom portion. Sawing off part of the bottom of the higher edge of the reducer can provide you with a bit more height for the higher floor if you need it.

Rubber Transitions

Another great option that you have for this type of situation is a rubber transition piece. Rubber transition pieces are offered by a number of different companies and they come in many different shapes and sizes. With rubber, you have many more options. For example, when you need a reducer, you can specify that you want it in a certain height. It may also come in different widths and angles. Therefore, you can get a custom solution for the particular height that you need.

You can get it in a flat ramp down or you could get it in a rounded style. Therefore, you can choose exactly the style that you want before you order it. This type of transition also comes in a number of different colors as well. Therefore, you should be able to match up the color of the transition to the laminate, wood, tile or other floor that you are going up against.

Metal Trim

In addition to wood and rubber, another option that you have is to go with a metal transition. They make a number of different metal transitions that could be used in this application. You could potentially get one that just covers the edge of the higher surface and gives it a finished look. You could also get one that ramps down to the other surface. These hard metal transitions are often used in commercial applications, so you know that they will be very durable regardless of the amount of traffic that goes over them.

Source: www.DoItYourself.com

Deep Cleaning Victorian Floor Tiles

Coalvile in the heart of the Midlands was a coal mining town and with that history has many period properties with traditional floors including the one in this post which has a Victorian tiled hallway. The tiles were in good physical condition for their age but were now looking faded and lifeless due to a build-up of ingrained dirt in the tile and were now overdue for a deep clean and re-seal.

Cleaning Victorian Hallway Tiles

Before I could seal the floor it would need to be stripped of any old coatings and in the process given a really good clean. To do this I applied a dilution of Tile Doctor Remove and Go and left it for to soak in to the tiles for about 15-20 minutes before scrubbing it in with a rotary buffing machine fitted with a black scrubbing pad. Once the whole floor had been scrubbed it was washed down with water which was then removed using a wet vacuum. Stubborn areas were then re-treated and grout lines also scrubbed using more Remove and Go and a stiff brush. Last step of the cleaning process was to give the floor a thorough rinse with more water to remove any trace of cleaning product and then as much was as possible was extracted using the wet vacuum. I wanted to seal the floor the next day so it was important to get the floor as dry as possible.

Sealing Victorian Hallway Tiles

I returned the next day to seal the floor and the work I spent into getting it dry was well spent as the floor had dried fully overnight and I was able to seal the Victorian tiles with two coats of Colour Grow which is an impregnating sealer that enhances colour and occupies the pores in the tile so contaminates can’t become ingrained in there. Colour Grow also provided the matt finish the customer wanted.





Source: Deep Cleaning Victorian Tiles

What Is the Best Floor Transition for Vinyl Tile and Ceramic Tile?

Whenever one type of floor meets another type of flooring, a floor transition is required to go between them. This is because different types of flooring often meet at different height levels, creating an awkward transition. Transition products come in many different types, good for transitioning between many floors, like ceramic and vinyl tile. They are especially made for various flooring needs: 

Gripstrip 

You can use gripstrip when tile meets other floor coverings. It will create a connection that looks nice while providing a safe transition between different types of flooring. It is touted as easy to install. It comes in silver, chrome and gold finishes. 

Floor Edge Strip 

A floor edge strip will not only create a smooth transition between two types of flooring but it protects your flooring against any cracks, chips or blows.  

Tile Trim 

Tile trim comes in an array of materials and looks. Like floor edge strips, it protects the tile from cracks or chips. It is durable and has a rounded and smooth edge. You can choose yours depending on the thickness of the tile you are using. It is available in 6 mm, 9 mm or 12.5 mm.

Source: www.DoItYourself.com

Hardwood to Marble Floor: Transition Molding Installation

Changing the materials you use on a floor can be difficult, and you will often need to use a floor transition piece to help you keep both edges of the flooring in perfect condition, and also prevent people from tripping over the edges between the floors. A perfect way to transition between materials is to use a transition molding piece. These come in different varieties, depending upon the types of flooring that you are changing between. If you are trying to transition between a hardwood and a marble flooring, this can be somewhat daunting, and you may be concerned about doing it yourself. Rather than call in an expensive handyman, you can follow the instructions below and install your own floor transition pieces.

What You'll Need

• Screwdriver
• Hammer
• Screws
• Transition Piece
• Saw

Step 1 - Installing Your Floors

The first thing you need to do is to install the floors. The marble floor will probably have been laid by a professional, so bring in the hardwood floor as close as possible to the other, while still leaving a gap of a few millimeters. The hardwood should be cut so that it is straight on to the marble, rather than curving or forming a diagonal pattern, as this can mean that you will have gaps in the floor. Once the floors are laid, ensure that they are both as clean and free of debris as possible.

Step 2 - Installing the Transition Piece

You will need a piece with a lip that hangs over the edge of the hardwood, but not the marble. This lip will have small screw holes in it. You will also need a top which extends over the ends of both floors. You will need to take the base of the transition piece, which forms a track between the two sides, and place it so that the lip hangs over your hardwood floor. Bang the track molding down between the floors until it is around level with the floors, and then screw the lip down onto the hardwood.

Step 3 - Adding the Top

When you have screwed the transition track down into the hardwood, you should take the top of the transition piece. This may be longer than  the space between the walls, or the door frame, and you will need to trim it to size with a saw. Cut across so that the top fits snugly in the gap, and sand down if necessary. Place the top over the track, ensuring that it is completely in alignment with it, and then hammer into position. The top should be flush with both floors so that you are in no danger of tripping over it.

Once the top has been hammered into position, leave the transition molding to settle. Then you can walk on it as you would with any other part of the floor.

Source: www.DoItYourself.com

Deep Cleaning Limestone Floor Tiles

This Polished Limestone floor had been laid in the communal hallway of a block of flats in Aston Clinton and as you can see from the photograph below the stone had become ingrained with dirt over time and was now overdue for a deep clean and polish. Apologies for sounding like a dentist and also the photographs as the lighting wasn’t brilliant in the corridor.

Cleaning Limestone Tile and Grout

Due to the heavy soling of the stone and grout lines we started by applying a strong dilution of Tile Doctor Pro-Clean which is an alkaline cleaning product that’s safe to use on Stone and Grout. The solution was scrubbed into the floor using a commercial rotary machine fitted with a fitted poly brush; once the cleaning solution had become dirty the floor was rinsed with water and the process re-applied until the stone and grout were clean.

Polishing Limestone Floor Tile

Our next task was to re-build the polish on the stone using a set of Tile Doctor Diamond encrusted burnishing pads which are applied to the tile in sequence from Coarse to fine further cleaning and polishing the stone until its returned to its original condition. The pads come in a set of four and you start with the coarse pad together with a little water. This this cuts through and removes surface grime, dirt and any remaining sealer. The floor is then rinsed and you move on through the remaining pads until the polish has been restored to the tiles. This process took up much of the first day so the floor was given a final rinse and left to dry overnight.

Sealing Limestone Tiles

On the second day we returned to find the tiles had dried and we started to seal the Limestone using three coats of Tile Doctor Colour Grow which is a colour intensifying sealer that soaks into the pores of the stone bringing out the natural colours whilst providing that all important lasting protection.





Source: Deep Cleaning Limestone flooring

How to Install Tile to Laminate Floor Transition Molding

Learning how to install tile to laminated flooring transition molding may be an effective way to define your space. Installing tile can give your home a brand new look and cost about half the price of other flooring types. The installation is simple for any do-it-yourself enthusiast and can be as easy as snapping the boards together like a jigsaw puzzle. But what do you do to make the transition from one room to another, especially for areas that may share functions like a kitchen dining area, where you may want to easily define one space from another? Transition molding may be the answer. You can even add a slightly different paint scheme or a Japanese panel. This tutorial will guide you through installing tile to laminated flooring transition molding.

What You'll Need

• Screws
• 1/4 inch Masonry bit
• Nails
• 1/4 inch wooden dowels
• Screwdriver
• Hammer
• Transition strip
• Transition track
• Cutting tool

Step 1) Choose Your Style

Choose a transition track that will go with the flooring you are installing. You can even choose a different color or material to mix things up a bit. Transition molding is a decorative item.

Step 2) Measure

Measure the length you need your molding to be and use a saw or tin snips to cut it to the correct length. Sandpaper any rough edges.

Step 2) Measure the Cut Pattern

Place the track and use the pre-cut holes to mark where you will be drilling. You can use a pencil for this.

Step 3) Drill Holes

Using the masonry bit, drill at your marks 1 1/2 inch down.

Step 4) Use Wooden Dowels

Using your hammer, tap the wooden dowels into the holes you just drilled. The dowels will need to be flush with the floor, so you will have to use a flat head screwdriver to chip them down, if needed. They will not show, so do not worry if they are ugly or rough.

Step 5) Place the Track

Place your track and line it up with the holes you drilled. You should be able to screw or nail it into place using the dowels for the screws to bite into.

Step 6) T Molding

Measure the doorway you will be installing the molding in. You may wish to measure it a little big so you can avoid the door stop area.

Step 7) Mark for the Doorstop

You will need to cut the T-molding to allow for the door stop. The easiest way to do this is by turning the T-molding on its side and using a pencil to show where to cut.

Step 8) Cut the T Molding

Use your saw to cut the T-molding for length and to allow for the door stop. Use sandpaper to smooth out the rough edges.

Step 9) Install the Molding

The T-molding is installed by pressing it into place along the track. Start at one end and work your way across until complete. You can use a piece of scrap lumber and the hammer to really get a good set.

Source: www.DoItYourself.com