Thursday, October 4, 2012

Sealing Reproduction Victorian Tiles

These Victorian Tiles had been laid in a hallway floor ten years prior and sealed with what turned out to be an impregnator that had long ago lost its strength through oxidation and years of cleaning with flash which is far too strong and attacks sealers. What was left of the sealer was easily stripped off with Tile Doctor Pro-Clean agitated using a rotary scrubber and then washed down with a hot pressure wash.
Before Restoration During Cleaning

Sealing Victorian Tiles


We offer the customer a choice when it comes to choice of sealer as there are a number of sealers we recommend and each one can leave a different finish, we can also apply a sample of the different sealers to a few tiles but it isn’t always a reliable way of telling the difference. In this case we sealed the Victorian tiles with 8 coats of Tile Doctor Seal & Go which is ideal for Victorian tiled floors and leaves a low sheen finish.

Sealed with Seal & Go for a traditional finish

However the story doesn’t end there, the customer decided the Victorian tiles looked too shiny and wanted a more matt finish. It’s the customer’s choice in the end so we removed the Seal and Go and sealed the tiles again using Tile Doctor Pro-Seal which is a no-sheen, natural look penetrating sealer and the results were great. For regular cleaning of sealed floors we recommend using a Neutral PH cleaner such as Tile Doctor Neutral Cleaner.

Sealed with Pro-Seal


Sealing Victorian Tiles