Cleaning a Dirty Victorian Tiled Doorway
The first job was to strip off the old Vinyl covering which had been glued down with some strong adhesive. We carefully scraped off as much as possible by hand and then soaked the floor in Tile Doctor Oxy-Gel which is a strong tile cleaning product which being in a gel doesn’t run off and for stays in position. We left it to dwell on the tiles in order to break down the glue and then scrubbed it in and followed up with a steamer and a rinse with water to remove the soil.To finish off he cleaning the tiles were treated to an acid rinse by applying Acid Gel which will remove any grout smears and treat any mineral salt issues rising through the floor overnight as the floor dries. Once the floor was clean and free of all the glue etc. it was time to repair the corner of the floor where several tiles were missing. Before started work I had managed to source replacements from Original Style Tiles who offer a wide range of colours and styles to suit the original floor. I set the replacement tiles in place and then grouted them in.
After the tile adhesive and grout had set I gave the floor a light clean with a damp sponge and then covered the floor with a clean dust sheet before leaving it to fully dry overnight.
Sealing a Victorian Tiled Porch
The next day the floor was checked for any issues and also dampness before moving onto seal the tiles. To seal the tiles, we then applied two coats of Tile Doctor Colour Grow which is a fully breathable sealer that is suitable for internal and external use, it also lifts the colour of the tiles and will prevent them from ingrained dirt in the future making the tiles easy to clean.Source: Victorian Floor Tile Cleaning and Maintenance in Lancashire