Polishing Damaged Marble Shower Tiles
Using a spray bottle containing a dilution of Tile Doctor Pro-Clean and a set of small Diamond encrusted burnishing pads attached to a handheld buffer I went to work on the tiles stripping away the existing sealer and bringing back the surface of the stone. During this process the damage to the tiles started to fade and once the sealer was removed the tiles took on a washed out appearance which was to be expected at this stage.Sealing Marble Shower Tiles
After drying any wetness with a heat gun I left them for a while so they could be sealed. Assisted by the underfloor heating the tiles soon dried out so after about half an hour I was able to apply a coat of Tile Doctor Ultra Seal which is an impregnating sealer that leaves a natural look. For the next couple of hours I added three more coats during which the tiles gradually came back to their previous colour. Each coat has to be fully dry before the next once can be added on. During the drying process I took the liberty of cleaning the customers shower unit, not something I'm in the habit of doing but it passed the time.As you can see from the photographs on this page the white streaky damage caused by the Cillit Bang has now been removed and the surface looks as good as it did before.
Source: Stained Marble Tiles Cleaned in Sussex