 |
 |
Cleaning Quarry Floor Tiles
On my arrival I spent time protecting the kitchen units and adjacent wooden floor and then started on removing the old sealer with Tile doctor Remove and Go; I sprayed it on working in small areas and working it into the tile with a brush making sure to scrub it in well, the resultant soiled solution was washed off with clean water the and then removed using a wet vacuum. After finishing with the tile I moved onto the grout joints using the same process to make sure they were all clean and then the floor was given a good rinse to neutralise the floor before sealing. Again a wet vacuum was used to remove any liquids from the floor and it was then left to dry fully overnight.Sealing Quarry Floor Tiles
The next day I returned to the cottage and after verifying the floor was dry with a damp tester it was sealed with four coats of Tile Doctor Seal and Go which provides on-going protection as well as adding a nice shine to the tile. |
 |
This job took me two days and whilst I was there I took the time to explain how to maintain the floor going forward and the importance of using a Neutral Cleaner to extend the life of the sealer. Certainly the customer was very happy with the results and left the following message our feedback system: “Absolutely delighted the tiles were very marked in places but Heidi has managed to get them off and the tiles are back to their true colour which I hoped they would be. Heidi explained step by step the procedure and I am very pleased with the result Thank you very much for the time spent and I would recommend Heidi -- Veronica”
Source: Quarry tile cleaning tips
