How to Clean Sandstone Tile

By eHow Contributor

Sandstone is a natural stone that can be used throughout a home to add a beautiful natural element in decorating inside as well as out. It's excellent for use around a pool or patio, as it's porous surface makes it non-slip. However, it does have some special care requirements to keep it looking its best.

Things You'll Need

• Sandstone tile
• Water
• Sponge
• Neutral pH cleaners
• Dust Mop
• Mop

Instructions

1. The first step to keeping sandstone clean is prevention. A good sealer applied after the sandstone is installed is a must, along with periodic resealing as most sealers can break down over time. If you purchase a home with sandstone already installed and don't know or can't determine when it was last sealed, check with an installer in the area to determine if you have a sealer that can be reapplied without stripping the old sealer, or if you need to have the old sealer removed completely before resealing.
2. Sandstone may be a stone, but it has a relatively weak, porous structure. Sandstone counters are particularly prone to stains from liquid spills and wet items set on them. It can also be easily scratched if dust and dirt are allowed to accumulate, particularly on floors. Floors should be cleaned daily with a non-treated, dry dust mop. Wipe spills immediately with a damp sponge and warm water.
3. Most outdoor sandstone is stained by organic materials, such as leaves, tree sap, or grass stains, or mold and mildew. Counter tops are frequently stained by greasy or oily stains, such as food or cooking oil. A traditional way of cleaning both these kinds of stains from sandstone is called poulticing. It involves using an absorbent material, such as talc, shredded white paper, or sawdust, mixing it with a cleaning agent (depending on the type of stain; see next step) and applying the mixture to the stain, making a mound about an inch thick. Plastic can be taped over the mixture. This method may need to be repeated several times. 
4. Hydrogen peroxide, 30/40 volume, which can be purchased from beauty supply outlets, can be used for mildew or mold and most organic stains. It acts as a bleach and removes most organic stains. Acetone, available at hardware stores, can be used for oily stains. Talc as an absorbent material works particularly well on oily or greasy stains. 
5. Deeply etched sandstone can be sanded down to eliminate the scratched area, but the area may end up a different color than the rest of the stone. 
6. Never use chlorine bleach as it can damage the sandstone. Also never use grout cleaner, or any cleanser with abrasives as sandstone is damaged by these chemicals. Avoid acidic cleaners as they will etch the stone. Lemon juice and vinegar are acidic and if spilled on counters, should be wiped up as soon as possible.

Tips & Warnings

• Start with the gentlest cleaning method first, before moving on to more aggressive methods or cleaners.
• Use a soft bristled brush to gently agitate warm water or a gentle cleaning solution in grout lines, to help loosen ground in dirt.

Source: www.eHow.com

Tips for Maintaining Natural Stone

• Keep surfaces dust free.
• Dust mop regularly with soft, clean, lint-free mop. Tend to spills immediately.
• Use mats at entrances to trap dirt, sand, gravel, etc.
• Clean your natural stone on a regular basis with warm water and a clean non-abrasive cloth, sponge or mop.
• What do I use as an every-day cleaner? We recommend using a neutral cleaner specially formulated for natural stone which will help remove soils that normal dusting or damp mopping leave behind. Acidity / alkalinity or even abrasives in ordinary cleansers may cause etching or scratching. Ask your local stone retailer which neutral cleaner they recommend.
• Squeegeeing shower walls and floors after showering removes soap and chemical residues that can damage your stone. It is critical to clean and seal shower stalls on a regular basis due to their exposure to soaps and moisture.
• Polish, rather than wax, with a polishing system suited to your particular type of stone. If your marble, lime stone, or any other natural stone in your home or business appears dull, stained or scratched, Marin Stone Care can restore your stone to its original beauty and luster.

Source: www.MarineStoneCare.com

Limestone - Cleaning and Sealing

General
Limestone is reputed in the international market for its premium quality, toughness and durability. It is often the preferred choice for interior and exterior in both commercial and domestic for flooring, wall cladding, paving and facades of buildings, railway stations, pavement, landscaping and garden stone.

Limestone Maintenance

Mix Remove and Go 50/50 with Nanotech Ultra Clean and leave in place for an hour before scrubbing and rinsing the floor with water. You may need to hire a Wet Vac machine to soak up the excess residue, then scrub and rinse with water again, cleaning the grout lines as you go.
Remove any cleaning solution using a wet-dry vac machine (any cleaning solution left on the surface may impact the performance of the sealer) then neutralise floor with clean water prior to sealing, remove with a wet-dry Vac machine and allow to dry overnight.
Alternatively if you have the use of a 350 RPM (or higher) buffing machine use a Red Twister pad to take off the Old sealer and ground in dirt, add water to the area and then go over each Tile 3 or 4 times, then remove the dirty water using a Vac machine and rinse the floor. Next take off the Red pad and apply a White Twister pad, repeat the process with this pad followed by the Yellow Twister Pad, remove the water with a Vac machine and then finally complete the polishing by applying a Green Twister Pad and polish with a squirt of water. When polishing is complete proceed to clean the grout.
When the floor is fully dry apply 2 coats of Tile Doctor Colour Grow colour enhancing sealer using a clean dry terry cloth (not the fluffy variety). Rub Sealant into the tile. Allow to dry before applying a second coat. Use a water test to achieve full cure sealability (F.C.S.).
For regular cleaning use a sealer friendly cleaning product such as Neutral Tile Cleaner which has been especially formulated for the regular cleaning of Sealed Stone and Tile surfaces keeping them fresh with a pleasant mint scent.
PLEASE NOTE: Most sealers break down after 2-3 years (depending on usage) and will need to be re-applied.

Source: Limestone Cleaning

Riven Slate Floor Cleaning in Lincoln

Slate floors especially riven slate can be a nightmare to keep clean as the uneven surface of a riven tile traps dirt and makes it difficult to clean. Our client in Lincoln had this issue, however as you will see from the pictures below we managed to get it looking like new again.

Slate Floor Cleaning

The Slate Floor Cleaning process involved a good cleaning with Tile Doctor Pro-Clean Tile and Grout cleaner, it’s an alkaline rather than acidic product that doesn’t harm the surface of the stone but is very effective at cleaning. We left the product to dwell for a while before giving the tile a good scrub to lift the soil and dirt trapped into the pores of the riven slate floor tile. Once the slate tile and grout were looking clean we gave the floor a good wash down to remove any remaining chemical and neutralise the floor.

Slate Floor Before Cleaning and Sealing

Sealing the cleaned Slate Floor

We left the floor to dry overnight and came back the next day to seal it using Tile Doctor Pro-Seal which is gives the floor a natural look and really lifts and reveals the colours in the slate. You can see from the photographs the difference and how amazing the colours are.

Slate Floor After Cleaning and Sealing

The client was so pleased he has booked us in to return and do some more work for him.


Source: Slate Floor Restoration in Lincolnshire

How to Repair and Replace Travertine Tile

Sometimes, no matter how careful a person is to care for their travertine tile, the tile sustains damage and must be repaired or replaced. Loose or damaged tile is most often the result of issues with the subflooring or improper installation. Though it is not the easiest or most pleasant task in the world, it can be done. Fixing loose tiles and/or replacing broken ones as needed is the best way to preserve the rest of the tile.

How to Repair a Loose Tile

First, identify loose tiles by listening for noise when walked on or a hollow sound when the tile is hit. In most cases, replacing the tile all together is the best thing to do. If this is not possible for financial or aesthetic reasons, injecting an epoxy glue solution underneath the tile to re-bond it to the subfloor is the only other option.

The tools needed for this job are: a drill, carbide tipped blade equal to or slightly smaller than the grout joint size, a large construction syringe, a high quality two part epoxy, and matching grout.

On either side of the loose tile, carefully drill holes into the grout joints. Mix the epoxy solution according to the directions. Carefully inject epoxy into one hole, until enough works its way through the tile to come out the hole on the other side. It may be a good idea to use a golf tee in the other hole to ensure the epoxy solution fills all voids before coming out the other side.

Dig out the epoxy slightly and allow it enough time to cure. After the mixture cures, fill the holes with the matching grout to finish the job.

How to Repair a Damaged Subfloor

If the subfloor is damaged, it should be repaired before the initial installation of the tile floor, to prevent further complications and issues as the floor ages. If the subfloor damage has to be repaired after a floor installation, the tile must be removed to expose it, therefore creating more work in the long run.

Use tools such as a: reciprocating saw, circular saw, jigsaw, or handsaw to carefully remove any damaged subfloor material. Wear the appropriate safety to protect from injury. When removing the damaged subfloor, practice care to avoid damaging any adjacent areas that are in good shape.

After the damaged material is removed, replace it with new materials. Secure it accordingly.

Once the damaged subfloor has been replaced, follow tile installation instructions to install the new tile floor.

Source: www.Learn.BuildDirect.com

How to Install a Tile Marble Floor

By Kevin McDermott, eHow Contributor

Marble tile floors have been around for centuries. Even today, in an age of much simpler and less expensive options, marble remains synonymous with elegance and class. Installing marble is more complicated than installing ceramic or other types of tiles because the marble can't be cut on a standard tile cutter, instead needing a wet saw. Also, since the tiles are straight-cut in their manufacture, the tile surfaces have to be completely even with one another.

Things You'll Need

• Chalk snapline
• Thin-set mortar
• Notched trowel
• Marble floor tiles
• Marble tile spacers
• Three-foot board (very straight)
• Rubber mallet
• Wet saw
• Unsanded grout
• Grout float
• Sponge

Instructions

Step One
Use the chalk line to divide the floor into four quadrants, laying two intersecting lines across, the middle of the floor.

Step Two
Spread down mortar at the intersection with your notched trowel, covering three or four square feet at the center of the floor with thin-set mortar. Keep the thin-set in one of the four corners of the intersection.

Step Three
Press a marble tile into the mortar bordered by two of the lines of the intersection. Set two spacers along one side of the tile. Press a second tile there, lining up the edges. Set a third tile alongside the others.

Step Four
Set the straight board over the three tiles so it spans all of them. Gently tap the board with your mallet to get the tiles flat and even with one another.

Step Five
Spread more mortar and set additional marble tiles, building out from the middle in a grid pattern and working toward the edges of the room. Put spacers between all of them. Stop after every group of three tiles and even them out with your mallet.

Step Six
Cut the tiles for the perimeter, by the walls, using your wet saw.

Step Seven
Let the tiles set overnight. Pull out the spacers.

Step Eight
Grout the tiles, spreading the unsanded grout over them with your grout float, forcing the grout into the spaces between the tiles and scraping it off the surface. Wipe up the excess grout with a damp sponge. Let it set for 24 hours.

Source: www.eHow.com

How to Make Floor Tiles Shine

By Kitty Cruiser, eHow Contributor

Tiles are a common flooring option because of their durability and low-maintenance factor. Over time, though, floor tiles can build up a layer of dirt and grime, making them dingy and dull. Fortunately, cleaning and revitalizing floor tiles is a relatively simple process. Restore the shine of floor tiles with the help of a few household items.

Things You'll Need

• Broom
• Dustpan
• Bleach
• Water
• Spray bottle
• Toothbrush
• Cloth
• Distilled white vinegar
• Bucket
• 2 sponges
• Lemon juice

Instructions

1. Remove the surface dirt from the floor tiles with a broom. Sweep it into a dustpan and discard.
2. Create a solution of equal parts bleach and water. Pour into a clean spray bottle.
3. Spray the solution directly onto the grout. Scrub the solution into the grout using a toothbrush.
4. Wipe the floor tiles and grout with a damp cloth to remove the water-bleach mixture.
5. Pour equal parts distilled white vinegar and cool water into a bucket.
6. Submerge a sponge in the solution. Wash the floor tiles with the saturated sponge. Start at one corner of the room and work toward the other corner.
7. Allow the floor tiles to air dry.
8. Saturate a clean sponge with lemon juice and wring out the excess liquid. Wipe the floor tiles with the sponge to make them shine and to fill the air with a pleasant aroma.

Source: www.eHow.com