Victorian Tiled Hallway Floor Restoration Detailed by North London Expert

My client discovered found this Victorian tiled floor under the carpet of a communal hallway in a large Victorian house in Bounds Green. The property had previously been converted into three flats and it seems the developers of the property dodged the cost of having the floor renovated and opted to glue down a carpet instead. The floor was in quite a state and there was a section of tiles missing where a pipe had been laid under the floor.

 

I visited the property to survey the floor and prepare a quote for renovating the floor. With the floor in such a state I could see I would need to source replacement tiles. Whilst there I also carried out a small test clean to understand what it would take to ensure a good result could be achieved. Impressed with results from the test clean and happy with the quote my client agreed to have us back to do the work.

 

Cleaning and Repairing a Victorian Tiled Hallway Floor

Day one started by deep cleaning the floor using a strong dilution of Tile Doctor Remove and Go which was scrubbed in with a black pad fitted to a rotary machine. This product weakens the glue and allows it to be removed with handheld scrapers, a steamer also comes in handy during this process.

Next step was to tackle the thin layer of cement screed which had been applied in some areas to level the floor ready for carpet. To do this a 200-grit diamond pad was fitted to the rotary floor buffer and run over the tiles along with Tile Doctor Acid Gel both to lubricate and help clean away the cement residues. This process generates a lot of soil with is rinsed off with water and extracted using a wet vacuum.

The 200-grit pad was followed up with a finer 400-grit pad to improve the condition of the tile, again using Acid Gel. After another round of rinsing and extracting the cleaning process was complete. As well as removing the cement the Acid Gel will neutralise any potential efflorescent salt issues that are a common problem with floors of this age. The floor was then rinsed with water and the soiling removed with a wet vacuum.

The next step was to tackle the damaged section of tiling where the pipe had been laid. To do this the backfilled cement was carefully chiselled out and the rubble removed. The subfloor was then rebuilt to with fast drying cement ready for tiling the next day.

For this project we were unable find existing replacement tiles that fitted exactly so instead large square tiles in the colours required were obtained from Original Features (just down the road in Crouch End N8) and then cut down to size on site.

After cutting all the tiles to match the existing pattern I laid them into the floor using a fast-drying flexible adhesive. The floor set over lunch and were grouted later that afternoon.

Sealing a Victorian Tiled Hallway Floor

The following day I returned and sealed the tiles with three coats of Tile Doctor Colour Grow which is a breathable impregnating sealer that will soak into the tile adding protection. This takes a while to apply as you have to wait at least half an hour between coats to dry before applying the next. 

Additionally, Colour Grow is a colour enhancing sealer and so was a perfect choice for this colourful floor. Being breathable it will also cope well with any moisture rising through the floor which is important for old floors like this which don’t have a damp proof membrane installed.

 

My client was very happy with the newly restored Victorian tiled hallway which looked so much better than the previous carpet and had added so much more value to the property. For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner, which is pH balanced cleaner that will clean the tiles without being so strong that it impacts the sealer.

Source: Hallway Floor Tile Cleaning and Restoration Service in North London

How to renovate a Victorian Tiled Hallway

The owner of this beautiful Victorian tiled hallway floor in Dinnington had wanted the floor restored for quite some time. The property had many Victorian features, but this floor had an unusual design which made it very special. The owners had researched how to clean it themselves but hadn’t managed to achieve the result they were hoping for. The main problem was that the floor had been spotted with small paint splashes from decades of decorating.


Dinnington officially forms part of in Rotherham and is the same distance from Rotherham as it is from Sheffield. The area was a big coal mining and steel producing area and unfortunately suffered huge job losses throughout the 80’s and 90’s so its not surprising that the local housing stock suffered for many years as a result.

Cleaning/Repairing a Victorian Tiled Hallway Floor

We first treated the floor with Tile Doctor Remove and Go, this acts quickly to break down any old sealers still present on the tiles and softens the old paint splashes. After a ten-minute dwell time a coarse 200-grit burnishing pad fitted to rotary floor buffer was applied to the tiles. More water was applied where required to help lubricate the process and make the pad really work its magic. The slurry generated was extracted using a wet vacuum and the floor inspected. The process was the repeated to ensure all the dirt was removed and the floor was as clean as possible.


Once happy the Victorian tiles were as clean as the could be it was time to give the floor an acid wash which would remove any old mineral deposits including grout smears. We also recommended this for old Victorian floors which do not have a damp-proof membrane installed and can suffer from white efflorescent salt deposits as moisture rises through the tile. To do this Tile Doctor Acid Gel was scrubbed into the to the floor using a 200-grit burnishing pad to make the acid gel work hard. Afterwards we rinsed the floor several times removing the slurry with a wet vacuum. This kept the mess to a minimum and the floor was already looking great.


The floor was left to dry over the weekend, and we would return the following week to carry out the sealing process.

Sealing a Victorian Tiled Hallway Floor

The following Monday we returned to seal the floor. First, we used the moisture meter to test the floor, we needed to ensure it was as dry as possible before sealing it. The client wanted a traditional look, so we opted for Tile Doctor Colour Grow which is a colour enhancing sealer that leaves matt finish. This product is perfect for this type of floor as it is fully breathable allowing moisture to pass through the tile and sealer and not become trapped under the floor where it could spread to the walls and cause rising damp.

Four coats of Colour Grow were applied in total allowing each to dry before applying the next. The sealer works by occupying the pores in the tile thereby protecting the floor and preventing dirt from becoming trapped making it much easier to clean.

I was very happy with the result; the floor was now in great condition and was one of the more dramatic in colour and pattern that I had come across. My customer also felt the same and left the following feedback for me.

"Matt did a professional and thorough job: our Victorian hall tiles really 'pop' with colour. Highly recommend. Karen T, Dinnington"




Source: Victorian Tile Cleaning and Sealing Service in South Yorkshire

How to Clean and Seal Mexican Terracotta Flooring

I have lost count of how many Terracotta tiled floors we have cleaned and sealed over the years and the one thing it has taught me is to wary of Mexican Terracotta. This type of Terracotta is extremely hard to work with, its porous and made of soft clay which has usually been badly fired. Even if you do have all the equipment, experience and the right products it can be a challenge.


If you look at these pictures of this Mexican Terracotta floor, we recently worked on in Penrith you will see the tiles looked very dull before we cleaned them. Testing indicated there was still a sealer present however we didn’t know what type it was. Knowing what your dealing with really helps narrow down the best cleaning products to use which for Terracotta tiles tends to fall into one of three different categories.

• To remove wax-based sealers, we use Tile Doctor Wax Away
• To remove acrylic based sealers, we use either Tile Doctor Pro Clean for light sealer coatings or Tile Doctor Oxy-Gel for heavier coatings.
• To remove solvent based matt sealers we use Tile Doctor Remove and Go for light coatings or Tile Doctor Nanotech HBU for thicker coatings.

If you have the misfortune of having had Varnish laid on top of these tiles, then the job becomes significantly harder. Because of this we have to be flexible when pricing for the work, naturally if we give a quote and we use the wrong system then not only will we be out of product but also the extra labour time to get the job right for the customer.

Cleaning a Mexican Terracotta Tiled Kitchen Floor

On this occasion the sealer at this property in Penrith was of the more common acrylic type, so we used a combination of Tile Doctor Pro-Clean and some Tile Doctor Oxy-Gel for the stubborn areas. The products are applied to the floor and then scrubbed in using a black pad fitted to a rotary buffing machine. This releases the old sealer and dirt from the tile resulting in a slurry that is then extracted off the floor using a wet vacuum. The floor is then rinsed with water and extracted again to make sure all the soil has been removed.

Last step the cleaning is to treat the tiles to an Acid Rinse to further clean the tiles and equalise the floors pH level after the use of alkaline cleaners. We used Tile Doctor Acid Gel for this which was first scrubbed in, then rinsed with water and finally extracted as before. The floor is then rinsed down again with water to remove any trace of product and the wet vacuum used to extract as much moisture from the floor as possible so it can have a better chance of drying out overnight.

Sealing a Mexican Terracotta Tiled Kitchen Floor

We called back the next day to seal the Terracotta first checking in several areas with a damp meter that the floor was nice and dry. All was well so several coats of a Tile Doctor Seal and Go were applied to the floor for a nice mid satin finish.


The finished floor looked fantastic and was doubly improved by the grout cleaning which had responded well to the Pro-Clean. The customer was over the moon with the transformation in their floor which now looked clean and bright.

Before leaving we left the customer with a bottle of Tile Doctor Neutral cleaner for aftercare. To get the best from their Terracotta tiles it’s important that customers use the correct product for regular maintenance cleaning from the start.




Source: Terracotta Tile and Grout Cleaning and Sealing Service in Cumbria

How to Clean and Seal Travertine Tile and Grout

This client got in touch about cleaning their Travertine Tiled floor which they were struggling to get clean. They had been using all the usual household floor cleaners, but nothing was having the desired effect. The property was in the lovely village of Sunbury On Thames within the borough of Spelthorne. I’m based in nearby Shepperton and so it wasn’t long before I was able to pop over and take a look at the problematic floor.


It turns out the Travertine floor which was installed throughout the hallway and kitchen had not been professionally cleaned since its’ installation twelve years prior. As you can see from the pictures, the old sealer that was protecting the Travertine had long since worn off and this in turn had allowed soils and spillages to penetrate deep into the pores of the stone and grout. The sealers demise may have been accelerated with the use of overly strong cleaning products but given it not been professionally cleaned for twelve years it was well overdue a deep clean and reseal.

I discussed with the client what we could do to clean the floor and demonstrated my proposed cleaning process on part of the floor. They were very satisfied with the demonstration and were happy to go ahead with my quote. The work would take two days to complete, one day for cleaning and a second day for sealing.

Deep Cleaning a Travertine Tiled Floor in Sunbury-on-Thames

Working in sections I started by spraying a strong dilution of Tile Doctor Pro-Clean on the floor and left if to soak in while I set up a floor buffing machine with a black scrubbing pad. After about ten minutes I ran the buffing machine over the working area, the machine was set to run at slow speed to reduce splashing. This action broke down the soils and helped lift the marks and stains out of the stone.

Tile Doctor Pro-Clean is a concentrated, multi-purpose high-alkaline cleaner, stripper and degreaser. The strong dilution of one-part cleaner to two parts water would ensure it would clean the floor and strip off any old sealers present on the tiles. Once the Travertine had been cleaned in this way, I ran a narrow brush along the grout lines to ensure they were also scrubbed clean.


After scrubbing a low-pressure rinsing machine was used to rinse the floor with water and extract all the dirt and cleaning products off the floor. After a final inspection the floor was then left to dry out overnight to leave the stone ready to receive a new seal the following day.

Sealing a Travertine Tiled Floor in Sunbury-on-Thames

I returned the next morning and tested the floor with a moisture meter to ensure the Travertine was dry. The results were good, so we set about applying two coats of Tile Doctor Colour Grow which is a colour enhancing sealer that soaks into the pores of the stone thus preventing dirt from becoming ingrained there. The sealer really brought put the contrast back into the stone by enhancing the colour whilst giving it the protection it needed to prevent future spillages staining the tiles.


The client was very happy with the result, the finished floor looked much lighter and 100% cleaner, the beauty of the natural stone was really apparent, and the grout which was once dark and was now white again.

For aftercare I recommended they avoid purchasing supermarket floor cleaners, the majority of which are too strong for sealed stone and let them with a bottle of Tile Doctor Neutral Tile Cleaner. This is a pH neutral solution that will not prematurely erode the sealer and is highly concentrated, so a small bottle lasts a long time.




Source: Travertine Tile & Grout Cleaning Service in Sunbury, Middlesex