How to Restore Colour and Structure to Tired Flagstone Flooring

A customer from Ulverston was nearing the end of a house refurbishment and got in touch regarding the renovation of a Flagstone floor. A lot of contractors had been through the property and the stone was not looking its best. Happy to assist I arranged to visit the property and provide advice on its restoration.

I went over to survey the floor and could see it was suffering from heavy ground-in soiling. The stone had lost its colour and now looked dull and lifeless; the grout was also heavily soiled with ingrained dirt. We discussed the floor in detail and I recommended a deep clean to remove all the dirt and then applying a sealer to restore colour to the stone and prevent ingrained dirt.

After measuring up I worked out a detailed quote and emailed it across to the customer for their review. Happy with quote I got the go ahead to restore the floor and agreed a date.

Deep Cleaning a Tired Flagstone Floor

To get the stone clean it was sprayed with a strong dilution of Tile Doctor Pro-Clean and this was left to soak in for a good fifteen minutes to give it time to start breaking down the ingrained dirt. The floor was then scrubbed with a rotary machine fitted with a coarse carborundum brush which lifts the dirt out of the stone and grout. The soiling was then rinsed off the floor and extracted with a wet vacuum.

To further clean the Flagstones and strip off old sealers and remaining surface residues the floor was further treated with a strong dilution of Tile Doctor Remove and Go. This time the solution was scrubbed into the stone using a coarse 200-grit diamond burnishing pad to refine the appearance of the stone.

After rinsing and extracting again the stone was given an acid rinse using Tile Doctor Acid Gel. This neutralises the stone after the use of alkaline cleaners and further cleans the stone to remove grout smears and old mineral deposits to further refine the surface, improving clarity and tone within the stone.

After a final review of the stone to spot clean any stubborn areas, it was given another rinse and dried as much as possible using the wet vacuum.

Sealing a Flagstone Floor

The floor was left to dry out overnight and work resumed the next day to finish the stone with the application of a sealer. First however the floor was checked for moisture, applying sealer to damp stone can result in a patchy appearance so best avoided.

The results were fine so work started to apply the first of what would be two coats of Tile Doctor Colour Grow. This sealer is an impregnator that soaks in the stone adding protection from within, this ensures dirt remains on the surface where it can be easily cleaned away. Another feature of Colour Grow, as its name suggests, is to enhance and deepen the colour and features in the stone.

 

Once complete the flagstones were restored to a rich, natural finish with improved colour depth and a far more uniform appearance. The surface is now protected and significantly easier to maintain.

 

For aftercare I recommended Tile Doctor Neutral Tile Cleaner which will clean the floor without impacting the sealer which can be a problem with many of the stronger products you find in supermarkets.

Source: Flagstone Floor Cleaning and Renovation Services in Ulverston Cumbria

How to Repair a Classic Victorian Tiled Hallway

This property located near the pretty market town of Ulverston was built in 1874 as inscribed on the front of the building. The Victorian Tiled floor comprised of Cream and Black tiles was original from when the house was built so that made the tiles at least 145 years old, in fact this was one of the oldest Victorian tiled floors I have ever worked on.


The floor was in good condition for its age but had experienced problems with broken and loose tiles around two of the door thresholds which is a common problem with floors of this age. Unfortunately, those tiles had been lost over the years and now the customer wanted this part of the floor rebuilding as part of the restoration. Fortunately, these tiles are still popular so finding suitable replacements wasn’t a big of a challenge as you might think.


I discussed with the client what needed to be done and after finding a suitable supplier for the replacement tiles was able to produce a quote which was accepted, and we agreed a price for the work.

Repairing a Cream and Black Victorian Hallway Floor

My first task was to rebuild the areas of broken and missing tiles. For the larger areas I mapped out a suitable pattern and set about cutting the replacement tiles to fit. A thick bed of flexible rapid set floor adhesive was applied to the floor and the replacement tiles bedded into the old cement base. Once the adhesive had hardened the tiles were grouted, cleaned-up and left to dry.


There were several areas that needed this treatment, so the work took some time to complete.

Cleaning/Repairing a Victorian Tiled Hallway Floor

Returning the next day, I first checked that the replacement tiles had set and that there were no further problems that needed addressing. All was well so I began cleaning the floor using a 200-grit followed by a 400-grit Diamond pad fitted to a weighted buffing machine running at slow speed and lubricated with water. The floor was rinsed with water after each pad and then the soil extracted using a wet vacuum.

The floor was then given an acid wash using Tile Doctor Grout Clean-Up, which at this stage acts in two ways for these old floors:

1. The Tile Doctor Grout Clean-Up product is made from Phosphoric Acid (not a brick Acid, which is a lot cheaper, more widely available but too strong for use on tile.) The acid we use works with us not against us and gives us time to change the pH of the floor to a slightly acidic pH. This is important on old floors like these where no damp proof membrane has been installed and it’s important to counter any alkaline salts in the floor which could lead to efflorescence later.

2. The sealer will bond to the surface a lot better when it has had this treatment and as a result you get a sharper cleaner finish.


Once done the floor was given another rinse and extraction with water and the wet vacuum and then left to dry out for a few days,

Sealing a Victorian Tiled Hallway Floor

We returned as promised to seal the whole floor using a couple of coats of a breathable colour enhancing sealer called Tile Doctor Colour Grow. As you can see form the pictures this really brought the hallway floor to life. Colour Grow works from the inside by occupying the pores in the tile and will protect it from ingrained dirt staining going forward.


It’s very important for a customer to use the correct cleaner after having there tiles cleaned and sealed professionally as using the wrong product can prematurely degrade the sealer. As a result, we recommend Tile Doctor Concentrated Neutral Tile Cleaner, its pH balanced and will not upset the sealer, thus getting maximum longevity out of the whole process.




Source: Victorian Tile Cleaning, Restoration and Sealing Service in South Cumbria

Victorian Tile Repair in South Cumbria

Ulverston is one of several historic market towns in Cumbria which has some excellent views of Morecambe Bay and the Southern Lake District. It is also home to some lovely old properties, including one that I visited recently to provide some repairs, cleaning and sealing for a Victorian tiled Read more...

Victorian Tiled Floor Cleaned and Sealed in Ulverston

Ulverston is one of several historic market towns in Cumbria which has some excellent views of Morecambe Bay and the Southern Lake District. It is also home to some lovely old properties, including one that I visited recently to provide some repairs, cleaning and sealing for a Victorian tiled floor. Although the floor was in good condition overall, the tiles were starting to loosen in some areas because the grout had come adrift and needed to be replaced.In fact, several tiles had broken as Read more...

To read more on this topic click here