Essex Tile Doctor Reveals how to Remove Years of Dirt from Terracotta Floor Tiles

The Terracotta tiles in the kitchen of this property in Danbury near Chelmsford were installed by the owners only five years prior. At the time they didn't like the light colour of the terracotta, so they were sealed with a black pigment added to the sealer in an attempt to darken the floor. Five years later and the sealer had clearly failed, and the tiles and grout were now seriously filthy and impossible to clean.

I wanted to be certain I could remove the dirt and old sealer so whilst at the property surveying the floor I did a cleaning test with Tile Doctor Remove and Go scrubbed into a couple of tiles by hand. The product worked really well and easily cleaned the tiles and grout with excellent results (see picture).

The difference was quite striking and equally impressive so after I worked out a quote, they were more than happy to get me booked in to complete the floor.

Deep Cleaning a Terracotta Tiled Kitchen Floor

I returned on the agreed date and immediately set about applying the same process to get the Terracotta tile and grout clean. I used a strong dilution of Tile Doctor Remove and Go working it into the tiles using a black scrubbing pad fitted to a rotary machine which also cleaned the grout lines.

The Terracotta was rinsed, and the soiling extracted with a wet vacuum. Once done the tiles and grout were inspected and any stubborn areas re-treated using the same process until I was satisfied the Terracotta, and grout was as clean as possible.

The underfloor heating was switched on and used to dry the floor overnight so it would be dry and ready for sealing the next day. This was a helpful addition and avoided the need for me to get the fan dryers out overnight.

Sealing a Terracotta Tiled Kitchen

Terracotta is made from clay and as a result is a very porous material, because of this it took eight coats sealer before it was fully sealed. I applied Tile Doctor Colour Grow sealer for this, it contains a colour enhancing formula which really brought out the orange and red colours in the tile.

This sealer is an impregnator that works by soaking into the tile, occupying the pores and ensuring dirt remains on the surface where it is easily cleaned away. It will provide long term protection moving forward and it improves the appearance of the floor without the tiles becoming too shiny.

I think you will agree from the photographs that the floor was completely transformed, and I’m pleased to say the owner was really happy and shocked to see it so different from before.

For aftercare cleaning I recommended Tile Doctor Neutral Tile Cleaner, this is a pH neutral product which will ensure the newly applied sealer retains its integrity. Many household cleaning products are simply too strong and will strip away the sealer with use.

Source: Terracotta Tile Cleaning and Renovation Products and Services in Danbury Essex

Northants Tile Doctor Details the Renovation of a Quarry Tiled Floor in Wollaston

This client from the village of Wollaston contacted Tile Doctor about cleaning and sealing their Quarry tiled floor. They were refurbishing the house and wanted to keep the original floor tiles as part of the renovation.

The tiles were installed throughout the ground floor, including the kitchen, lounge and hallway. However, as I was to discover myself, they were covered in years of grime, and they were not sure if they could be restored.

I went over to survey the floor and could see that any sealer that may have protected the tiles from ingrained dirt had long since worn off and as a result dirt had become ingrained into the pores of the quarry tiles. Once this happens its very difficult to keep clean.

 

I had to agree the floor was overdue a deep clean and re-seal and so took some measurements in order to work out a quote for doing the work. The quote was accepted, and a date set for starting the work which would take two days, one to clean and one to seal.

 

Cleaning a Quarry Tiled Ground Floor

To deep clean the quarry tiles, a strong dilution of Tile Doctor Remove and Go was applied to the floor and left to dwell for a short while. The solution was then scrubbed into the tile using a black scrubbing pad fitted to a rotary machine.

The solution soon turned black with the dirt that was pulled out of the tiles and was rinsed away with water and extracted using a wet vacuum. I inspected the tiles afterwards and could see some paint splashes from years of decorating were still evident, so I re-applied the product and repeated the process to get rid of them.

The grout was then cleaned by hand using Tile Doctor Pro-Clean and a scrubbing brush, again extracting the waste once complete. I find this is the most effective way to clean grout as the pads struggle to reach into the recess of the grout line.

To complete the cleaning process, I then gave the floor an acid rinse with Tile Doctor Grout Clean-up, this was applied to remove old grout smears and further clean up the tiles. All soiling was rinsed off with water and extracted with a wet vacuum. The floor was left to dry off overnight.

 

Sealing a Quarry Tiled Ground Floor

Returning the following day, the first job was to test the floor with the damp meter to check it was dry. The tiles needed to be dry enough to accept the seal and applying sealer to damp tiles can result in a patchy appearance. This is always worthy checking when cleaning Quarry tiles as that are naturally quite porous so can take some time to dry.

Once satisfied the readings were within the correct range, I was ready to seal. I selected to use Tile Doctor Seal and Go Extra for this, it’s a breathable sealer which is useful for older floors such as this where there is no evidence of a damp proof membrane being installed. Breathable sealers allow for moisture to rise through the tile and evaporate at the surface, without this moisture can build-up under the floor causing it to reach out to the walls where it could cause rising damp.

I applied two coats of Seal and Go Extra waiting for the first to dry before applying the next. The sealer lifts the deep red colours in the Quarry tiles and adds a nice appealing shine. The sealer works by ensuring dirt remains on the surface where it can easily be cleaned away.

My client was very happy with their now clean quarry tiled floor and left the following feedback for me: "I was looking forward to the results before it was even booked in, and I was not disappointed. A professional approach and very helpful throughout."

Before leaving I took time to explain how to maintain the floor using Tile Doctor Neutral Tile Cleaner. Its important to use a product like this on a sealed floor as many tile cleaning products are simply too strong and will strip the sealer off the floor with regular use.

Source: Quarry Tile Floor Cleaning and Sealing Services in Wollaston Northamptonshire

How to Renovate Old Victorian Quarry Tiles by Lancaster Expert

A first glance you might not notice much improvement in this Quarry tiled floor that we recently worked on at a Victorian house in Caton near Lancaster. However, look closer and you will see that a pattern has been worn into the tiles from a previous covering most likely carpet underlay. The sealer on the floor was also due to be replaced so having surveyed the floor on my initial visit I worked out a plan to renovate the Quarry tiles which would include deep cleaning the tile and grout, removing the underlay patterning, and then re-sealing the tiles to keep them protected.

 

Deep Cleaning a Quarry Tiled Floor

To start neat Tile Doctor Oxy-Gel was applied to the floor and left to soak in for twenty minutes giving it time to break down soils etc. Then a 200-grit Diamond burnishing pad was attached to floor buffing machine which was a heavily weighted for extra grip and run a few times over the tiles. These pads are very aggressive and ideal for cleaning off the pattern left by the carpet underlay. Oxy-Gel was chosen for this as being in Gel form its more manageable and holds itself against the clay Quarry tile for longer allowing the product work to a much harder, whereas a liquid cleaner generally soaks away into the clay and underneath meaning you need to use more water to remove it later resulting in longer drying times.

 

After the gel has been scrubbed into the tiles (no water needed at this stage) a wet vacuum Is used to remove the soiling generated during the process. After this initial clean a small amount of water is added to the floor and we go over with the same 200-grit diamond pad extracting the water off the tiles within five minutes of it being applied. With the Oxy-Gel removed the floor was given and acid rinse using Tile Doctor Acid Gel using the same process as before but this time using a Black scrubbing pad and only allowing it to dwell for 10 minutes. Acidic products are quicker acting on clay and so need less dwell time for it to work. Water was then added and after brushing it in to the floor it was removed using the wet vacuum within five minutes. I sometimes do this job twice as this is the last of the deep cleaning process and will ensure the tiles are free from any debris and dirt before we allow the clay tiles to dry out before sealing. Before finishing for the day, I took time to apply matching grout where it was missing which was mainly around the edges and sponged off the excess. With this done the floor was left to dry off overnight.

 

Sealing Quarry Tiles

The next day we conducted a damp test, but despite the use of Gel cleaning products it was still too damp to seal. My client however wanted to seal how the tiles would look with the sealer we were planning to use which was Tile Doctor X-Tra Seal, so to do this three tiles were force dried using an Air blower and a Heat Gun. With the sealer approved the floor was left for two days so it could fully dry out, the damp test showed a much better reading and we were able to crack on applying the sealer to the whole floor. Only one coat of X-Tra Seal was needed, it’s a thick Oil based product that soaks into the pores of the tile protecting it from within, it also fully breathable so ideal for old floors like this one that don’t have a damp proof membrane. Lastly it contains a colour enhancing formula that in this case improved the deep Red and dark Black colours in the tile.

 

Lastly for aftercare I recommended Tile Doctor Neutral Tile Cleaner which is a gentle but effective tile and grout cleaning product. You have to be careful when choosing an cleaning product for use on sealed tiles as many are bleach based and simply too strong.

 

Source: Quarry Tile Cleaning and Renovation Service in the Caton Lancaster