Northants Tile Doctor Details the Renovation of a Quarry Tiled Floor in Wollaston

This client from the village of Wollaston contacted Tile Doctor about cleaning and sealing their Quarry tiled floor. They were refurbishing the house and wanted to keep the original floor tiles as part of the renovation.

The tiles were installed throughout the ground floor, including the kitchen, lounge and hallway. However, as I was to discover myself, they were covered in years of grime, and they were not sure if they could be restored.

I went over to survey the floor and could see that any sealer that may have protected the tiles from ingrained dirt had long since worn off and as a result dirt had become ingrained into the pores of the quarry tiles. Once this happens its very difficult to keep clean.

 

I had to agree the floor was overdue a deep clean and re-seal and so took some measurements in order to work out a quote for doing the work. The quote was accepted, and a date set for starting the work which would take two days, one to clean and one to seal.

 

Cleaning a Quarry Tiled Ground Floor

To deep clean the quarry tiles, a strong dilution of Tile Doctor Remove and Go was applied to the floor and left to dwell for a short while. The solution was then scrubbed into the tile using a black scrubbing pad fitted to a rotary machine.

The solution soon turned black with the dirt that was pulled out of the tiles and was rinsed away with water and extracted using a wet vacuum. I inspected the tiles afterwards and could see some paint splashes from years of decorating were still evident, so I re-applied the product and repeated the process to get rid of them.

The grout was then cleaned by hand using Tile Doctor Pro-Clean and a scrubbing brush, again extracting the waste once complete. I find this is the most effective way to clean grout as the pads struggle to reach into the recess of the grout line.

To complete the cleaning process, I then gave the floor an acid rinse with Tile Doctor Grout Clean-up, this was applied to remove old grout smears and further clean up the tiles. All soiling was rinsed off with water and extracted with a wet vacuum. The floor was left to dry off overnight.

 

Sealing a Quarry Tiled Ground Floor

Returning the following day, the first job was to test the floor with the damp meter to check it was dry. The tiles needed to be dry enough to accept the seal and applying sealer to damp tiles can result in a patchy appearance. This is always worthy checking when cleaning Quarry tiles as that are naturally quite porous so can take some time to dry.

Once satisfied the readings were within the correct range, I was ready to seal. I selected to use Tile Doctor Seal and Go Extra for this, it’s a breathable sealer which is useful for older floors such as this where there is no evidence of a damp proof membrane being installed. Breathable sealers allow for moisture to rise through the tile and evaporate at the surface, without this moisture can build-up under the floor causing it to reach out to the walls where it could cause rising damp.

I applied two coats of Seal and Go Extra waiting for the first to dry before applying the next. The sealer lifts the deep red colours in the Quarry tiles and adds a nice appealing shine. The sealer works by ensuring dirt remains on the surface where it can easily be cleaned away.

My client was very happy with their now clean quarry tiled floor and left the following feedback for me: "I was looking forward to the results before it was even booked in, and I was not disappointed. A professional approach and very helpful throughout."

Before leaving I took time to explain how to maintain the floor using Tile Doctor Neutral Tile Cleaner. Its important to use a product like this on a sealed floor as many tile cleaning products are simply too strong and will strip the sealer off the floor with regular use.

Source: Quarry Tile Floor Cleaning and Sealing Services in Wollaston Northamptonshire

Nottinghamshire Floor Restoration Expert Details How to Restore Painted Brick Flooring in Ollerton

We were asked by our client in Ollerton, near Sherwood Forest, to renovate a couple of original brick floors that dated to the Georgian period. The floors were in a recently renovated cloakroom and the utility room and had been left to the end of the works.

 

Both floors had been painted at some point in their long history hiding some of the original features of the property. We can improve old floors like these, but I do have to set the expectations of the client. We can definitely make big improvements, but floors of this age can rarely not be restored to their original appearance. The other problem of course is its impossible to see what we are dealing with until all the paint is removed, and the floor is uncovered. The client was very keen to try and gave us the go ahead to do the renovation, they agreed to my quote and we booked in a suitable date in to carry out the work.

 

18th century floors like these do not have damp proof membranes and can be laid directly onto compacted soil, as a result efflorescence where moisture rises through the floor can be a common problem. Normally I use a lot of water to clean a floor but in this case, I didn't want to exacerbate any damp issues and introduce more moisture into the sub flooring, so I used gel cleaning products.

 

Removing Paint from Georgian Brick Flooring

To remove the numerous latest of paint from the bricks they were covered in a strong paint stripper and then covered with a plastic sheet, leaving it overnight. The following day with the paint softened the bricks were deep cleaned with Tile Doctors Oxy-Gel and Acid Gel combined and worked in with light diamond abrasive pads. This stripped the paint from the brick flooring along with old worn coatings allowing it to be lightly rinsed with water and the soiling removed with a wet vacuum.

The process had to be repeated in a couple of areas that were particularly stubborn but eventually we got there. The floor we uncovered was quite different and was then to dry out for a few days before we could tackle the sealing.

 

Sealing Georgian Brick Flooring

On our return the day the brick flooring was sealed with Tile Doctor X-Tra Seal to saturation point. This is a colour enhancing impregnating sealer that forms a protective breathable finish that will cope with the excess moisture and help manage the efflorescence problem.

 

For aftercare I left the client with a bottle of Tile Doctor Neutral Tile Cleaner and advised them how to maintain. This product is pH neutral so will not damage the newly applied seal unlike some of the household cleaners on the market. It should keep the floor in good condition and ensure that maintenance is minimal moving forward. Our client was very happy with the work we carried out and delighted with the improvement of the floor particularly the colour!

 

Source: Brick Floor Restoration Service in Ollerton Nottinghamshire

Renovating an Old Quarry Tiled Floor in Shropshire

This was a property adjacent to Benthall Hall which is a historic building owned by the National Trust near Much Wenlock. Many of the buildings in this town date back hundreds of years including Benthall Hall which is recorded in the Domesday Book of 1086.


The property hadn’t been lived in for several years and the new tenants wanted to sympathetically improve the look of the Brick Shaped Quarry Tiles on the lounge floor and in the toilet where the floor had been laid with nine-inch square quarry tiles. Both floor areas had been painted over previously and due to dampness issues the paint was flaking off leaving a very unappealing look. No doubt this contributed to the reason the property has been left un-occupied for so long.

Cleaning a Quarry Tiled Floor

To give the floor a deep clean I would need to remove all the flaking paint; there were several ways I could go about this so after some consideration I decided to try Tile Doctor Remove and Go.

Remove and Go is a multi-purpose coatings remover that can strip sealers off tiles as well as remove paint and other coatings, it’s also designed for use on Tile, Stone and Grout so safe to use. I applied a strong dilution of the product to the floor and left it to soak in for a good ten minutes. It was then scrubbed into the floor using a black seventeen-inch scrubbing pad fitted to a rotary floor machine. The floor was then rinsed down with water and the soil extracted using a wet vacuum. With the floor clean I could see I had been successful in removing most of the paint but there were areas where further work was needed and so I repeated the process three or four times and used a steamer on the stubborn areas until I was happy with the condition of the floor. After rinsing for a final time, I inspected the floor and could see the tiles looked a hundred times better.

My next thought was to seal the Quarry tiles to protect them from future staining and enhance their look. The problem however with old floors like these is that they don’t have a damp proof membrane and can have damp problems. The floor needed to be dry before applying a sealer and with all the water used to rinse the floor it may take some time to dry out. I discussed this issue with the customer and we agreed that I will return to monitor the floor and arrange to seal it when it was dry. In-fact I did return after a week and tested the floor with a damp meter which confirmed the floor still was still too damp.

Sealing a Quarry Floor Sealing

They were due to move into the property in a months’ time, so I visited them again to check the floor and unfortunately the damp level was still too high. I concluded that there were several factors preventing the quarry tiles from drying out: the tiles were laid on sand, the property as I mentioned had not been lived in for years also there had been a lot of rain over the last couple of months.


We agreed that once they move in and start to heat the building up, the floor have a much better chance for drying and when it looks dry, they will give me a call and I will check it for them and seal it if possible.

Given the damp issues my thoughts are to seal the floor with a coat of Tile Doctor Colour Grow and then finish with Seal and Go Extra, both are which breathable sealers and will leave the floor with a nice sheen finish.




Source: Quarry Tile Cleaning and Renovation Service in Shropshire