Showing posts with label limestone. Show all posts
Showing posts with label limestone. Show all posts

Tuesday, August 1, 2017

Removing Coatings and Sealers from Stone

Slightly different story for you below; this time from the medieval town of Tewksbury which dates all the way back to the 8th century. A customer there had asked if there was anything that could be done to restore the appearance of their polished Limestone kitchen floor on which he had previously applied a wood sealer which had turned the tiles brown. I inspected the floor and ran a test clean on a small section of tile which successfully removed the wood seal. This gave the customer the confidence to book me into to complete the job which I estimated would take three days to strip off the old sealer, deep clean and reseal with a more appropriate product.

Limestone Tiles Sealed With Brown Wood Sealer before restoration in Tewksbury

You probably can’t appreciate how bad the tiles looked from the photograph above but if you look at the indicated area under the kitchen units where the kick boards have been removed you can really see how the brown stain in the wood sealer has darkened the look of the tile.

Removing Old Sealers from Limestone Kitchen Floor

On the first day I prepared the area by removing the kick boards from the underneath the kitchen units so they wouldn't get affected by the cleaning process and started wetting the floor with water. The water lubricates the burnishing process whereby coarse diamond encrusted pads are applied to the floor with a buffing machine. We started the process using a very coarse 100 grit milling pad to remove the wood sealer before moving onto the finer pads from 200 grit, 400 grit, 800 grit and finally 1500 grit pad building the finish of the floor as we progressed. The floor is rinsed with water between pads and the slurry is removed using a wet vacuum. This burnishing process took up all of the first day so the next day I returned to focus on the edges I had missed and the grout lines, being a relatively small format tile for Limestone there was a lot of grout to cover. I tacked the grout lines with Remove and Go which is a powerful stripper and cleaning agent which is applied along the grout line and then scrubbed in with a narrow stiff brush before being rinsed away with water. The edges were treated with a set of small six inch milling pads fitted to a hand held buffing machine in a similar process as on the first day.

Sealing a Limestone Tiled Floor

On the third and final day the floor was spray burnished which a process is involving a very fine 3,000 grit floor burnishing pad and a little water spayed onto the floor during the application. This process really tightens up the pores in the stone and restores its appearance. After making sure the floor was free of any lose grit I then proceeded to seal the Limestone with Tile Doctor Ultra Seal which is a natural look sealer that doesn’t alter the appearance of the stone but penetrates into the pores of the stone to protect it from within. I left it to dry for an hour then buffed the floor with a white buffing pad before apply a second coat. This was also left to dry for an hour before running the buffing pad over for a last time.

Limestone Tiles Sealed With Brown Wood Sealer After restoration in Tewksbury

It took a fair amount of work to get the floor looking back the way it was meant to be but I’m very pleased with the outcome and more importantly my customer was really happy.

Limestone Tiles Sealed With Brown Wood Sealer After restoration in Tewksbury



Source: Limestone Cleaning and Sealing Service in Gloucestershire

Saturday, May 13, 2017

Limestone Tiled Floor Maintenance

This Limestone tiled floor was around 50m2 and installed in Kitchen and Hallway in a new build style property in Newmarket, 'The Home of Horse Racing'. The property was only 3 years old and the owner was having difficulty keeping the floor clean. Cleaning Limestone Floor Tiles The first step Read more...

Tuesday, May 2, 2017

Restoring an Acid Damanged Wet Room Floor in London

All carbonate materials, including those used in building and construction, are sensitive to acid deposition. A common example of this is the reaction that occurs when you combine bicarbonate of soda and vinegar. Another example of a material affected by this is Limestone, which is often used as Read more...

Acid-Damaged Limestone Tiles Restored to New in Wapping

All carbonate materials, including those used in building and construction, are sensitive to acid deposition. A common example of this is the reaction that occurs when you combine bicarbonate of soda and vinegar. Another example of a material affected by this is Limestone, which is often used as tiled flooring. When exposed to acidic products, the damage caused to Limestone tiles is both material and aesthetic, and many property owners who suffer this kind of damage assume that they are Read more...

Thursday, April 20, 2017

Restoring Green Westmorland Slate Tiles in Yorkshire

It's not too common that you find two very different natural stone tiled floors in the same property. However, this is exactly what I discovered on a recent visit to a farmhouse property in Ripley, near Harrogate in North Yorkshire. The owner wanted to restore both their Westmorland Green Slate Read more...

Wednesday, April 19, 2017

Polishing Blue Moleanos Limestone Floor in Yorkshire

It's not too common that you find two very different natural stone tiled floors in the same property. However, this is exactly what I discovered on a recent visit to a farmhouse property in Ripley, near Harrogate in North Yorkshire. The owner wanted to restore both their Westmorland Green Slate Read more...

Restoring Green Westmorland Slate and Blue Moleanos Limestone Tiles in Ripley

It's not too common that you find two very different natural stone tiled floors in the same property. However, this is exactly what I discovered on a recent visit to a farmhouse property in Ripley, near Harrogate in North Yorkshire. The owner wanted to restore both their Westmorland Green Slate tiled entranceway and a Blue Moleanos Limestone tiled floor. Westmorland Green Slate originates from the Lake District in Cumbria - where it has been quarried for many centuries - and is known to be a Read more...

Wednesday, March 1, 2017

Polishing a Granite & Limestone floor tile in Westminster

This interesting unusual Granite and Limestone tile combination was installed in the kitchen of a house in Westminster, London. The black Granite was looking Dull and the Limestone had a dirty appearance of the tile surface which had lost its shine and was looking dull. Stripping the Granite and Limestone Tiled Floor To resolve we had to strip back the Granite and Limestone surfaces using a set of burnishing pads, these diamond encrusted pads come in a number of different colours each one Read more...

Wednesday, February 15, 2017

Changing the Grout Colour used on Porcelain tiles in Kendal

A customer in Kendal requested that the colour of grout installed on 20m2 newly laid textured Porcelain tile floor was changed; the tiler had used a Sandstone coloured grout and they were not happy with the colour or the grouting in general which looked patchy. I recommended the use of an epoxy Grout Colouring product that re-colours, seals and rejuvenates existing grout joints and comes in twelve different colours and after showing the customer the different colour options they picked Read more...

To read more on this topic click here

Monday, January 11, 2016

Limestone Tiled Floor Maintenance

This Limestone tiled floor was around 50m2 and installed in Kitchen and Hallway in a new build style property in Newmarket, 'The Home of Horse Racing'. The property was only 3 years old and the owner was having difficulty keeping the floor clean. Cleaning Limestone Floor Tiles The first step Read more...

Monday, November 30, 2015

Removing Marks from a Limestone Tiled Floor in Stourbridge

We often get called to sort out problems left behind by Tilers and this case was no exception. This Limestone tiled floor in the kitchen of a house in the historic town of Stourbridge had been sealed using a cloth and resulted in visible wipe marks being left behind in the top surface seal. Removing the Sealer from Limestone Tiles To resolve we had to cut back the surface using a set of twister burnishing pads, these diamond encrusted pads come in a number of different colours each one does Read more...

Tuesday, November 17, 2015

Polishing a Granite & Limestone floor tile in Westminster

This interesting unusual Granite and Limestone tile combination was installed in the kitchen of a house in Westminster, London. The black Granite was looking Dull and the Limestone had a dirty appearance of the tile surface which had lost its shine and was looking dull. Stripping the Granite and Limestone Tiled Floor To resolve we had to strip back the Granite and Limestone surfaces using a set of burnishing pads, these diamond encrusted pads come in a number of different colours each one Read more...

Wednesday, November 11, 2015

Changing the Grout Colour used on Porcelain tiles in Kendal

A customer in Kendal requested that the colour of grout installed on 20m2 newly laid textured Porcelain tile floor was changed; the tiler had used a Sandstone coloured grout and they were not happy with the colour or the grouting in general which looked patchy. I recommended the use of an epoxy Grout Colouring product that re-colours, seals and rejuvenates existing grout joints and comes in twelve different colours and after showing the customer the different colour options they picked Read more...

To read more on this topic click here

Tuesday, November 10, 2015

Changing the Grout Colour used on Porcelain tiles in Kendal

A customer in Kendal requested that the colour of grout installed on 20m2 newly laid textured Porcelain tile floor was changed; the tiler had used a Sandstone coloured grout and they were not happy with the colour or the grouting in general which looked patchy. I recommended the use of an epoxy Grout Colouring product that re-colours, seals and rejuvenates existing grout joints and comes in twelve different colours and after showing the customer the different colour options they picked Read more...

To read more on this topic click here

Friday, November 6, 2015

Limestone Sign Wall Cleaning at Reading Business Park

This was an unusual request to clean a large Limestone wall used to mount a sign at a Reading Business Park that had been installed approximately 8 to 10 years prior and never cleaned. The old sign had been removed from the stone which had exposed the unprotected areas of stone leaving a shadow. Pollutants, carbon soils, road dirt and weathering had discoloured the Limestone and the client was unable to get it satisfactorily clean. You can see from the photo below how obviously dirty the Read more...