Removing Stubborn Glue from Victorian Floor Tiles in South Yorkshire

Detailed below is the restoration of a beautiful Victorian tiled hallway that we completed for a ‘co-housing’ community who had purchased a large house in Nether Edge. Situated three miles south if Sheffield, Brincliffe House was built in 1850 and had been used as NHS offices since the end of the Second World War but had been empty since 2012. Built originally for Herbert Unwin who was the owner of Pond Street Brewery it was now subject to a three-million-pound conversion into fifteen apartments.


When we first visited the property to survey the floor, we were shown around the ground floor where they had discovered magnificent Victorian tiled floor. The new owners had no idea the floor was there as the NHS had covered it up decades earlier and glued carpet on top. Being a co-housing community, they were keen to do the restoration themselves however after several unsuccessful attempts to remove the strong carpet adhesive they thought better of it and called us in. We ran several tests and worked out the best way to remove the glue. The floor covered about 70 sqm in total so we knew we had our hands full.

Removing Carpet Glue from an Old Victorian Tiled Floor

I’d worked out that the best way to remove the carpet adhesive was a combination of coating remover products and abrasive burnishing pads, these are industrial diamond encrusted pads that are usually used to resurface stone however we find they work equally well on Victorian tiles as well.


Working in small sections the floor was treated with a Tile Doctor 200-grit 17 inch Diamond pad fitted to a rotary floor buffer using water as a lubricant. This stripped off a lot of surface dirt and glue which was then rinsed off with water and extracted with a wet vacuum. Next the floor was coated with a mixture of Tile Doctor Remove & Go and Wax Away, two powerful coating removers that are safe to use on Tile and Stone. The mixture was left to soak into the tiles for about twenty minutes before being scrubbed in with a black scrubbing pad which slowly released the glue and dirt from the pores of the tile. In some areas the glue was so thick we found it necessary to use hand scrapers as well. As before the soil was rinsed off with water and then extracted using a wet vacuum.


Each section of flooring was inspected and retreated where necessary, then once happy with the result it was given a final rinse with water to remove any trace of cleaning product. After two days of hard work the results were truly amazing, and it was very satisfying to see the floor come back to life section by section.

Sealing Victorian Hallway Tiles

The community were very happy with the results and thankful I had managed to achieve such an amazing transformation. They were however keen to do as much of the project as they could by themselves, so I advised them on the importance of protecting the tiles with a sealer and left that bit tot the community.


With regards to sealing my recommendation was to apply a couple of coats of Tile Doctor Colour Grow as it would enhance the red and blue colours in the tiles even further. Also, being fully breathable it would be able to cope with any moisture issues which is important on these old floors which were laid without a damp proof membrane.




Source: Victorian Tile Cleaning and Restoration Service in Sheffield, South Yorkshire

Renovating Terracotta Tile and Grout Found Under Carpet in Cheshire

I was contacted by a home owner in Appleton near Warrington who had a Terracotta tiled floor in their dining Room. The floor had previously been covered in carpet and they were keen to have the whole floor restored.

To complicate things further the Carpet had been stuck down with a strong adhesive and a local builder had advised them to remove the glue using brick acid. Although this was successful it had the side effect of discolouring the grout lines and no amount of rinsing with the floor with water to dilute and wash off the acid would resolve the problem.


Happy for me to resolve the problem, my client informed me they were going on holiday and would like me to do the work whilst they were away. This was a great idea as it would guard against unwanted foot traffic during the cleaning and sealing process and it would also mean they would have a nice surprise waiting for them on their return.

Deep Cleaning a Terracotta Tiled Kitchen Floor

After protecting the Kitchen units and skirting boards with plastic sheeting my first job was to strip any remaining sealer off the Terracotta tiles using a strong dilution of Tile Doctor Pro-Clean. The solution was spread across the floor and then left to dwell for twenty minutes before scrubbing it in with a black scrubbing pad attached to a rotary floor buffer. I then used a wet vacuum to remove the now dirty cleaning solution from the floor.

The grout was also given a good scrub using more Tile Doctor Pro-Clean but this time it was scrubbed in with a narrow stiff brush until I was satisfied it was as clean as it could be. The floor given a good rinse and I then inspected the floor tile and grout to ensure it was clean and free of sealers, any areas that needed ore work were retreated and the floor given a final rinse and dry with the wet vacuum before being left to dry off fully overnight.

Sealing a Terracotta Tiled Kitchen Floor

I returned the next morning and tested the tiles with a damp meter to ensure they were dry before beginning applying the sealer. All was well, so I started by applying a single coat of Tile Doctor Colour Grow. Colour Grow is an impregnating sealer that seeps into the pores of the tile protecting it from within and enhancing the natural red colour of the Terracotta in the process.

Once the first coat had dried I followed up with two coats of Tile Doctor Seal and Go which is a compatible water-based sealer that works really well on clay tiles and adds a lovely sheen finish to the floor.

The last step was to resolve the problem with the discoloured grout lines by applying a white grout colourant to the grout. This gave the grout a fresh and consistent appearance throughout and also has the benefit of sealing the grout which will protect it from staining and also make it much easier to clean.

Last step was to finish the sealing of the floor by topping up the sealer with another three coats of Seal and Go to ensure the floor was fully sealed.


The result was a huge improvement and now looked like a recently installed Terracotta floor. When my customer returned from holiday they were more than happy with the floor and the work I had done.


Source: Terracotta Tile Cleaning, Renovation and Maintenance Service in Cheshire