Deep Cleaning Old Quarry Tiles in Devon with Tile Doctor Remove and Go

This client called us out to look at their grubby Quarry tiled lobby at the front of their property in Kenton near Exeter. Being the main entrance to the property it saw a lot of foot traffic so once the sealer had worn down it wasn’t long before the dirt started penetrating the pores of the tile and became difficult to keep clean.

 

The property was originally a school and dated back over 200 years. The Quarry tiles in the entrance lobby were probably as old as the building and as mentioned earlier were looking worse for wear having been partially covered for years. They weren’t sure how old the tiled floor was, but they were keen to see it restored. They were therefore desperate to get the floor deep cleaned and a fresh seal applied. They agreed to my quotation, and we arranged a convenient date to carry out the work.

 

Cleaning a Quarry Tiled Hallway Floor

I started by taping up the skirting to protect it from the cleaning products we would be using. I then applied Tile Doctor Remove & Go to the floor and covered the area with plastic sheets to stop the evaporation of the products so that I could achieve a longer dwell time. This would really get to the deep-seated dirt and loosen it so it can be lifted from the pores of the tiles.

I then worked the floor with 200-grit carbide brush fitted to a rotary machine to remove the dirt ingrained in the clay pores of the tile. Some of the grout was loose and dislodged in the process, however my client was expecting this and had already arranged for his tiler to complete a full re-grout once we had finished cleaning. The soiling released by the cleaning process was rinsed off the floor with water and extracted with a wet vacuum.

 

Sealing a Quarry Tiled Lobby Floor

I wanted to seal the floor the next day so I left a couple of driers in place overnight to speed up the drying process. The next morning when I returned, I first checked the floor to make sure it was dry with a moisture meter.

The dryers had worked their magic so I was able to begin sealing the floor with Tile Doctor X-Tra Seal which is an effective interior and exterior sealer. With the lobby being a high traffic area, I applied four coats to ensure a durable seal. The benefit of this sealer is it gave the floor a nice sheen really bringing out the depth of colour in the tiles, and with the newly applied grout the floor looked great.

 

For aftercare I recommended the use of Tile Doctor Neutral Tile Cleaner. This is a pH neutral product which is gentle enough for daily use. It won’t compromise the newly applied sealer which can be a problem with the stronger bleach-based products you find in supermarket products.

The work completely transformed the Quarry tiles and my client was very happy with the completed job and told me they wished they had tackled it sooner.

Source: Quarry Tile Cleaning and Sealing Service in Devon

Restoring Old Reclaimed Slate Flagstones in Devon

These lovely old Slate flagstones were reclaimed form an old waterworks in Exeter about twenty years ago and had been laid in an old fisherman cottage in Dawlish during a sympathetic renovation, replacing an old floor that had been laid in the 1970s (which have a lot to answer for with old houses!). The flagstones really looked the part and were larger and thicker than usually available on the market new. Other than being dirty and a pain to clean because of the dogs living in the house, around the edges of some of the larger tiles there was some sort of fluorescent orange residue which was up to 10mm thick in places and as hard as the stone it was adhered to.

Dawlish is a lovely little fishing harbour village on the South-East Cornwall coast with lots of interesting history. For hundreds of years the practice of smuggling imported goods prospered in the area thanks to its convenient harbour. The village is home to only around 5,000 inhabitants.

As you can see from the photo below, the tiles – along with the grout lines - were very dirty and stained. No wonder the property owner was beginning to give up on salvaging them! However, I assured the customer that with the right cleaning products and techniques, I could make a significant improvement to the condition of the floor.

Burnishing and Cleaning Old Slate Flagstones

To tackle the orange residue staining I used a grout removal tool which allowed the natural texture of the stone to remain rather than smoothing off the whole edge. The dirt and staining in the slate flagstones however was so deeply ingrained I felt it best to strip back the affected layer of stone using a process known as burnishing. This involves the application of diamond encrusted burnishing pads to the floor, effectively grinding away the muck to reveal a cleaner surface beneath. When dealing with polished stone such as Limestone, Marble and Travertine, we will normally use a system of four burnishing pads – each with a different level of grit – to gradually restore the shine to the tiles.

However, in the case of these rustic, unpolished Slate Flagstones, I opted only to use only the Coarse and Medium grit burnishing pads to cut back the affected layer of stone, leaving a surface that could subsequently be scrubbed using Tile Doctor Remove and Go. This is a multi-purpose product that strips away any old sealer, adhesive marks and paint stains, while also cleaning the stone and grout.

This process ensured all traces of old sealer were removed and that the whole floor was left fresh and clean. The resulting soiled solution was extracted from the floor using a wet vacuum and the whole area rinsed with fresh water to remove any traces of cleaning product. To end the first day of work, the floor was left to dry overnight.

The village the cottage is situated in is very isolated to traffic; there is a car park at the top of the town and the only option is to walk the nearly half a mile each way to the cottage on the harbour so streamlining the kit used was a necessity! In the end two trips each way go the kit required there and back with the biggest machines being a wet vac and a rotary scrubber.

Sealing Old Slate Flagstones

Returning to the property the next day, I ran some damp tests to check if the floor was dry and ready to be sealed. This is particularly important in older properties like this, as it’s quite likely that there is no damp proof course present and moisture issues are far from uncommon.

Thankfully, the tiles proved dry and I could seal them using Tile Doctor Colour Grow. This impregnating, colour-enhancing sealer provides a robust seal, as well as a natural-look matte finish which really matches the character of these original Flagstones. It also really lifted the natural shades in the stone.


The customer was ecstatic with the result. To make sure the floor can be kept looking great for many years to come, I recommended that the customer clean it regularly using a product called Tile Doctor Stone Soap. It’s specially formulated for the routine maintenance of natural stone floors; not only will it clean the floor very well, it will also continue to add to the natural patina of the stone.


Source: Slate Flagstone Floor Cleaning and Renovation Service in Devon