Renovating Dirty Terracotta Floor Tiles in Derbyshire

Terracotta Tileshave been around in certain parts of the world for over two millennia; in fact, the word Terracotta means burned earth. The ancient Romans used a variety of Terracotta tiles in their villas and palaces for many centuries.

Terracotta tiles are thicker than most modern tiles, giving them strength and durability. The one big downside to Terracotta, however, is that it has no glaze on the surface and can pick up and store muck and dirt very quickly. If you have ever owned a Terracotta floor before you will be able to relate to this problem.

Such was the dilemma facing our client in rural Hope Valley in the Peak District National Park of Derbyshire. Her Conservatory had been laid with Terracotta tiles around 25 years ago and over the years had been continuously covered with wax. Now, no matter how many times she mopped the floor it never looked clean because all the dirt over many years had been drawn in and sealed into the wax. She called in Tile Doctor to deep clean the floor and treat it with a gloss finish.

Cleaning a Terracotta conservatory floor

I started by removing the layers of wax with Tile Doctor Nano-Tech HBU (a heavy build-up remover that is designed to work where other cleaners won’t) and Tile Doctor Remove and Go, specially formulated to draw out ingrained stains and remove heavy grease build-up. I combined both products into a powerful cleaning cocktail and left them to soak into the floor for about twenty minutes. The solution was then scrubbed into the tile and grout using a black scrubbing pad fitted to a rotary machine. The resultant soil was rinsed off with water and then extracted from the floor using a wet vacuum.

After cleaning I inspected the floor and could see there was still some wax left in the grout between the Terracotta tiles, so I went over the floor with a hand-held steamer and scrub brush, it took some time, but the process was perfect to remove the last traces of wax. Finally, I washed the floor with clean water twice and left it to thoroughly dry overnight.

Colour Restoring and Sealing a Terracotta tiled floor

The following day I went back to seal the floor but found there were still a few areas with higher levels of damp than I would have liked. My solution was to seal the tiles with Tile Doctor Colour Grow. This is a superb colour intensifying matt sealer that provides durable protection and enhance colour but importantly, it’s fully breathable therefore allowing any damp in the tiles to evaporate. I then left the floor to completely dry out, which took five days.

On my return I finished the sealing of the floor with four coats of Tile Doctor Seal and Go. This is a specially formulated water-based blend of acrylic polymers that provides a stain-resistant surface seal and a durable low-sheen finish that works really well on Terracotta.


The conservatory looked beautiful with its clean Terracotta tiles. The unsightly and grimy orange-brown floor had been restored to its original Terracotta colour with a very attractive sheen. And, of course, the floor was now correctly sealed to prevent the problem happening again and to make mopping easy. I left the house with good feeling!


The customer was delighted and left this positive feedback:

“Henry did a brilliant job, friendly professional polite and efficient. He kept us fully informed of the procedures he was using. We would not hesitate to use him again or to recommend him to others.”




Source: Terracotta Tile Cleaning and Sealing Service in Derbyshire

Top 3 Woods for a Hardwood Subfloor

A hardwood subfloor is vital to give a good surface for the hardwood floor. The subfloor itself doesn't have to be made of hardwood.

Douglas Fir

The ideal subfloor is Douglas fir. It should be boards that are nailed down at 90 degrees to the joists. Having them at an angle holds everything much more firmly. You should use sold #2 or a better grade of Douglas fir.

Pine

Frame grade pine boards also make a good hardwood subfloor. Like fir, the wood is tight in grain. In both cases the boards should be 1 inch by 6 inches.

Plywood

Plywood is the most common hardwood subfloor. It’s cheaper than boards and quicker to install. The best plywood subfloor will be ¾ inch thick. This will give ample strength to support the floor and people. A Sturdi Floor plywood subfloor is recommended most highly by hardwood associations.

It’s followed by ¾ inch OSB, or oriented strand board, plywood. Like all subfloors it should be attached at 90 degrees to the joists for strength and tightness.

Among the recommended subfloors, the lowest on the list is 5/8 inch plywood. This is cheaper but not as thick and, therefore, not as strong as a hardwood subfloor.

Source: www.DoItYourself.com

Renovating Dirty Terracotta Tile and Grout in East Cheshire

We were asked if we could restore the appearance of a large Terracotta tiled floor in a kitchen/dinner that had not been cleaned for many years. The sealer had mostly worn off in the high traffic areas but was still fairly thick under the table. Terracotta tiles are made from soft clay making it very porous and likely to absorb anything that lands on it; as a result, it’s important to maintain the sealer to stop this happening. Now with the sealer worn off completely in the busy parts of the floor anything that landed on the floor was very quickly absorbed into it.


The house was in Knutsford on the East side of Cheshire which was named as Best Place to Live in the North West” by the Sunday Times in 2017; being close to the Peak District and within easy reach of Liverpool and Manchester its easy to see why.

Deep Cleaning a Spanish Terracotta Tiled Kitchen Floor

My first task would be to completely remove the old sealer so the whole floor could be given a deep clean before resealing. It’s not a good idea to add a new sealer on top of another especially if you don’t know what was used before, it can also lead to a build of sealers on the tile which will darken their appearance. To do this I soaked the tiles in a strong dilution of Tile Doctor Remove and Go which is a powerful stripping and cleaning solution that’s designed to removes old coatings on tiles and draw out ingrained staining. After twenty to thirty minutes the solution was worked into the tiles using a black buffing pad fitted to a rotary buffer machine. I also used a wire hand brush along the grout lines to make sure they were cleaned as the scrubbing pad can fail to reach into the recess. It wasn’t long before the old sealer and dirt was released from the Terracotta which was then washed off the floor using water and a wet vacuum.


I inspected the floor at this stage and retreated any stubborn areas using the same process. I did have a few problems removing some greasy marks however I managed to get rid of these by applying Tile Doctor Wax Away worked in by hand with a scrubbing brush. Once I was happy that the floor was clean and free of old sealers it was given a final rinse to remove any trace of cleaning product, dried with the wet vacuum and left to dry out fully overnight.

Sealing a Terracotta Tiled Kitchen Floor

On my return the next morning I took a few damp readings to check the floor was dry before starting with the next step of sealing the tiles. All was well so began to add the first of multiple coats of Tile Doctor Seal and Go which is a water-based sealer that works really well on Terracotta and leaves a nice subtle sheen to the tile. Being was based it has the added advantage of not leaving a solvent smell as it dries.


The Terracotta took some time to seal completely, in fact ten coats of sealer were required to fully seal the tile. You can always tell when a tile is sealed by adding a small drop of water to the surface, if it forms into a bubble then its’ fully sealed.


I’m not sure you can appreciate the difference from my photographs but hopefully you can see that Terracotta tiles now look much fresher and the grout cleaner and lighter in colour.


Source: Terracotta Tile Cleaning and Sealing Service in East-Cheshire

Common Problems Installing a Subfloor Over Concrete

If you are installing a subfloor over concrete, there are several problems that you could run into. This process is commonly done to provide a subfloor to attach hardwood flooring. Consider the following common problems that may arise when you attempt to add a subfloor over concrete.

Choosing the Adhesive

When you attach plywood to a concrete subfloor, you will need to make sure that you get the right type of adhesive. Many people purchase the wrong kind of adhesive for this project, and the plywood ends up coming off the floor.

Spreading the Adhesive

When it comes time to apply the adhesive to the floor, you must take care to do it properly. The adhesive is very thick, so you have to use a trowel to apply it to the floor. Take your time to ensure that the adhesive is adequately spread.

Doors

Another problem that many people have is going through a door with the subfloor. If you have connecting rooms, you will need to cut the plywood to fit in the doorways. This can be difficult for many people, and it takes some patience and skill to cut it properly.

Source: www.DoItYourself.com

Major Restoration of a Victorian Tiled Hallway in London

A customer in Winchmore Hill which is part of the London borough of Enfield was having major refurbishment works done to their home which included an upgrade to the central heating system. As part of the work a new radiator had been installed in the hallway however the utility company when putting in the new heating system had chased out two deep pipe channels in the central part of their beautiful Victorian tiled hallway floor.


This was a real shame as the majority of the floor was in good condition; the owner of course wanted the floor restored so our brief was to do exactly that and carry out repairs to the pipe channels and to all the door thresholds that were either existing or new so they all matched in.

Restoring a Victorian Tiled Hallway

Our first task was to clean the tile and grout and strip off old sealers and waxes which we did by applying a dilution of Tile Doctor Remove & Go combined with equal part of Tile Doctor Pro-Clean. This was scrubbed into the floor with a black scrubbing pad fitted to a rotary machine and then rinsed off with water and extracted with a wet vacuum.


After deep cleaning we then carried out the tile repairs and replacements to pipe channels, missing and mislaid tiles to thresholds. Some or the tiles were replaced with matching reclaimed tiles and others were new sourced from Original Style who have a large range. Altogether we replaced circa 500 pieces of tile in order to repair the damage caused by the heating engineers and achieve a consistent pattern throughout the hallway.

Sealing Victorian Tiles

The cleaning and re-tiling work was carried out over three days and we returned on the fourth day to seal the floor with an initial two coats of Tile Doctor Colour Grow which is an impregnating sealer that enhances colour. We then protected the floor for a further week with cardboard cut to size, this allowed other trades to finish their work without messing up the floor. A week later we returned to lift the cardboard to apply the finishing seal using Tile Doctor Seal & Go which adds the final protection. Five coats were applied to reach the right level of protection and desired satin finish restoring the natural appearance and lustre of the tiles.


The whole job allowing for the drying times of adhesive, grout and sealing took five days in total. It was worth it though as restored Victorian hallway really gives the property the Wow factor as you enter.




Source: Victorian Tile Cleaning and Sealing Service in London

Removing Candle Wax from Premium Lapicida Sandstone Tiles in Yorkshire

This customer who lived in the old North Yorkshire market town of Bedale, had a Lapicida Sandstone floor installed many years prior and over the years the sealer had worn off and dirt had become ingrained into the pores of the stone making it dull and difficult to clean effectively. Based in Harrogate, where they have Europe’s largest stone gallery, Lapicida are a premier Tile and Stone company that specialise in reclaimed Sandstone with prices that range from £79 to £594 per square metre.


Naturally having such an expensive stone floor installed my customer wanted it to look its best however when your living with a stone floor day in, day out you fail to notice the gradual decline in its overall appearance. Then one day you suddenly realise the floor is overdue a deep clean and reseal and call in Tile Doctor; there is an alternative however, simply speak to Tile Doctor about setting up an annual Maintenance Plan whereby we pop by once a year to clean the floor and top up the sealer.

Deep Cleaning a Lapicida Sandstone Floor

To deep clean the floor the sandstone flagstones were covered in a strong 1:3 dilution of Tile Doctor Pro-Clean which was left to dwell and soak into the stone for ten minutes before being scrubbed clean using a rotary buffing machine fitted with a black pad. The now dirty cleaning solution was then removed using a wet vacuum and then the whole floor washed down with water and stubborn areas re-treated until I was satisfied. Unusually for Sandstone it was all graded and uniformly flat which made cleaning a lot easier.

With the floor clean and all the dirt removed it revealed some black marks, most of which were from candle wax which is very difficult to get off. To tackle this problem a heat gun was used to melt the wax and then it was dappled with a clean cloth. This process was mostly successful, but some still left a faint Mark which the customer was ok with.

After giving the floor a final rinse and drying it as much as possible with a wet vacuum it was left to dry off fully overnight.

Sealing a Lapicida Sandstone Floor

I returned the next day to seal the floor first checking it for dampness using a damp meter. The flagstones were dry. I was going to seal the Stone with Tile Doctor Colour Grow which would have enhanced the natural colours in the stone, but the customer liked the light appearance of the cleaned stone, so l used Tile Doctor Ultra Seal instead; Ultra-seal is a natural look sealer, so it doesn’t darken the stone. Both sealers are what we call impregnators which work by soaking into the pores of stone protecting it from within by preventing dirt from becoming ingrained.


I’m sure you will agree the floor looks much improved, certainly the customer and myself were both very pleased with the transformation of the floor; my customer even left the following testimonial on the Tile Doctor feedback system.

Nigel Stoker was knowledgeable, efficient and very pleasant. My floors are looking amazing. Claire G, Bedale




Source: Lapicida Sandstone Cleaning and Sealing Service in Yorkshire

Floor Joist Repair: Fixing a Broken Floor Joist

To prevent your floor from sagging and being damaged, you may need to make a floor joist repair if the joist is broken. This should be done as soon as possible after you find a broken joist to avoid damage.

What You'll Need:

• Saw
• Wooden board the same thickness and width as the joist
• Drill
• Bolts and Nuts
• Tape measure

Step One: Cut the Board

You will need to cut the board at least 6 inches longer on each side of the break to give it proper support. Measure the broken area and cut the board accordingly. Then, using the drill, drill two holes in each end of the board about 2 inches from the end the size of the bolt that you have purchased. Be sure the bolts are long enough to go through this board and also through the broken floor joist board.

Step Two: Install the Board

Use the new board to measure where the holes for the bolts should be on the existing floor joist and mark them, then drill. If the broken joist has shifted a bit, you will first need to install one side of the brace board you have made by bolting it onto the old joist and securing with nuts. Then have someone push the old boards until they are even while you bolt in the other side of the new brace and tighten.

Source: www.DoItYourself.com