Wednesday, June 18, 2025

Tile Patio Cleaning Tips

Most people with a tile patio don’t tend to think about the amount of cleaning necessary to keep it looking good until it looks drastically bad. When this happens, it can be a rather daunting task to get it back to its former glory, especially for those that have never done heavy duty outdoor cleaning. Here are a few tile patio cleaning tips and ideas to make this process just a little bit easier.

What You'll Need:

  • Power washer
  • Stiff bristled outdoor broom
  • Soft brushes or scrub pad
  • Tile cleaner products
  • Work gloves and clothes
  • Face mask

Using the Right Tools

It all starts by using the right tools, and the right tool to start with is a good stiff bristled outdoor broom. For best performance, make sure that the broom is designed specifically for outdoor use. Most hardware stores will have what you need here. Some other tools that will go a long way are soft scrub brushes (nothing heavy duty or you’ll scratch the tile) and a power washer, which you can rent if you don’t already own one.

Using Proper Chemicals

Chemicals can be dangerous and tricky to work with, but it may be necessary for extreme stains from dirt and other things. If you must use them, first off, be extremely careful. Always use gloves, eye protection, a mask if necessary, and anything else specified in the directions to keep yourself safe. Also, be mindful of all the effects of the chemicals you choose. Some may end up bleaching your tile more than you’d like or they can erode the glaze that makes your tiles easier to clean, so test it on an inconspicuous spot first. Also, some chemicals may be harmful to plants and shouldn’t be used if you intend to rinse your patio of into your lawn, or if you have patio plants that can’t be removed during cleaning.

Cleaning Slate and Ceramic Patio Tile

Cleaning your ceramic and slate patio tile can be tricky, especially if you are looking to maintain a smoother appearance. Many cleaners and cleaning tools, especially acidic chemicals and heavy duty products like steel wool, will destroy the surface of your patio ceramic tile and leave it scratched, dull looking, discolored, or worse. As mentioned above, all cleaners need to be specifically for your type of tile and all cleaning tools need to be soft enough not to damage anything.

Luckily, it rarely comes to such drastic cleaning measures for ceramic and slate tiling. To keep your tile looking great, start by doing weekly sweeps with a good outdoor broom. Once or twice a month, go over your tile with a damp mop, which will help pick up or loosen what the broom can’t while bringing a good shine back to your tile. If you have any stains, make absolutely certain to clean them up immediately. Always start with warm water and a soft scrub pad. If more is needed, move on to a light, non-acidic cleaner. If the stain persists, try using a 5 to 1 mixture of water and peroxide, saving any bleach or harsher chemicals for last.

Cleaning the Grout

Most of the necessary tile cleaning, even those that have stains, can be handled with a stiff bristled broom every week, a damp mopping every month, and the occasional light cleaner (window cleaner usually works) with a soft scrub pad for stains. Grout, however, gets dirtier faster because of being very porous. It can also be more difficult to clean with your broom, mop, and scrub pad because the tiles are often raised above it, causing narrow crevices. To work around this, use a soft or medium bristled toothbrush with your cleaner.

Wednesday, June 11, 2025

How to Clean and Maintain a Tile Patio Table

 A tile patio table is easy to clean and keep, especially if you do regular maintenance work on it. You can keep your tile patio table in pristine condition for years to come by simply doing these easy cleaning and maintenance steps.

What You'll Need:

  • Mild Detergent
  • Oxygen Bleach
  • Degreaser
  • Acetone Stripper
  • Natural Stone Cleaner (pH7 - Optional)
  • Distilled Water
  • Sanding Blocks
  • Fine grit sandpaper or rotary drill and sandpaper pads
  • Sealer
  • Paint
  • Paintbrush
  • Mask
  • Sponge
  • Scouring Pad
  • Cotton Cloth

Step 1 - Know the Tiles' Surface

Determine first the type of tiles used in the patio table. Natural stones, specifically slates, require gentle cleaning, while ceramic tiles must not be cleaned with abrasive tools that might scratch the surface of the tiles.
Granite and marble require some mechanical polishing to remove deep-seated dirt and polish the surface to level the scratches with the surface area. After cleansing, slate tiles must be neutralized with a natural stone cleaner, with pH 7 acidity level, to prevent discoloration after cleansing and chemical treatment. The aim here is to know the type of tiles you have and select the best cleanser for it.

Step 2 - Wash and Rinse

Prepare the detergent solution (or natural stone cleanser) by mixing the detergent with water. Dip a sponge and wash the tile patio table in a circular motion. Use a scouring pad for natural stones to remove hardened dirt. Stick with a sponge when cleaning ceramic tiles. Rinse the surface with water.

Step 3 - Disinfect and Degrease

Prepare the oxygen bleach solution. Using 5 teaspoons to every gallon of water will suffice. Apply the solution onto the table with a sponge or cloth to disinfect the surface from germs, and remove living organisms such as molds or algae. Rinse with water.

A patio table is a great place to eat snacks, so degreasing is a step that must not be skipped, especially with tiles made from natural stones that absorb oil and grease quickly down to their pores.

Follow the manufacturer’s instructions on how to use it. Apply it onto the table using a sponge or a cloth. Allow it to work for five minutes and then scrub or just rinse it off.

Disinfect the tile once a month and degrease it once every two months. Less exposure to chemicals such as bleach and degreasers can lengthen the life of your tiles.

Step 4 - Sand, Apply Sealer or Re-paint the Legs

Every two or three years, sand and apply sealer on the surface. This is to protect your patio table from moisture, oil, and acidic substances from penetrating deeply into the tiles’ pores. Sanding or polishing is like bringing out the new "skin" from your tiles, and the sealer serves as protection for the newly polished surface.
At the same time, you can repaint the legs. Use a paint stripper to remove old paint.